Hallo, habe es jetzt selbst gesehen, nachdem ich in das Skript reingeschaut habe. Ich war im Verzeichnis root. Und da lag noch von vor zwei Jahren das trusty714.cloop mit den zugehörigen Dateien. Und das Skript schaut zuerst nach, ob ein cloop vorhanden ist und aktualisiert dieses. Sehe ich das richtig? Vielleicht sollte das Skript aber dann nicht install_xenial_client heißen ;-)
Viele Grüße Jürgen Am 17. Oktober 2016 um 10:30 schrieb Jürgen Horzella < juergenhorze...@googlemail.com>: > Hallo Jesko, > > bei mir hat es was zerschossen, und zwar wurde trusty714 heruntergeladen, > obwohl ich immer xenial geschrieben habe ... > Was lief falsch? > > Viele Grüße > Jürgen > > *wget http://cloop.linuxmuster.net/install_xenial_client > <http://cloop.linuxmuster.net/install_xenial_client>* > --2016-10-17 09:55:59-- http://cloop.linuxmuster.net/ > install_xenial_client > Auflösen des Hostnamen »cloop.linuxmuster.net (cloop.linuxmuster.net)«... > 178.63 .8.109 > Verbindungsaufbau zu cloop.linuxmuster.net > (cloop.linuxmuster.net)|178.63.8.109| > :80... verbunden. > HTTP-Anforderung gesendet, warte auf Antwort... 200 OK > Länge: 8996 (8,8K) [text/plain] > In »»install_xenial_client«« speichern. > > 100%[======================================>] 8.996 --.-K/s in 0s > > 2016-10-17 09:55:59 (109 MB/s) - »»install_xenial_client«« gespeichert > [8996/899 6] > > 09:55/0 server ~ #* bash install_xenial_client* > Zusammenfassung: > ---------------- > start.conf:* start.conf.trusty714* > patchclass: trusty > files to linbo: trusty714.cloop trusty714.cloop.desc trusty714.cloop.info > trusty 714.cloop.macct > start.conf.trusty714 trusty714.cloop.postsync > trusty714.cloop existiert. Sicherungskopie... > sending incremental file list > trusty714.cloop > 4657830786 100% 40.51MB/s 0:01:49 (xfer#1, to-check=0/1) > > sent 4658399451 bytes received 31 bytes 42157461.38 bytes/sec > ...OK. > Kopiere trusty714.cloop nach /var/linbo/ > sending incremental file list > trusty714.cloop > 2452492727 100% 46.39MB/s 0:00:50 (xfer#1, to-check=0/1) > > sent 2452792188 bytes received 31 bytes 45846583.53 bytes/sec > ...OK. > setze Dateirechte von trusty714.cloop ...OK. ...OK. > > trusty714.cloop.desc existiert. Sicherungskopie... > sending incremental file list > trusty714.cloop.desc > 12 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 100 bytes received 31 bytes 262.00 bytes/sec > ...OK. > Kopiere trusty714.cloop.desc nach /var/linbo/ > sending incremental file list > trusty714.cloop.desc > 34 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 122 bytes received 31 bytes 306.00 bytes/sec > ...OK. > setze Dateirechte von trusty714.cloop.desc ...OK. ...OK. > > trusty714.cloop.info existiert. Sicherungskopie... > sending incremental file list > trusty714.cloop.info > 137 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 225 bytes received 31 bytes 512.00 bytes/sec > ...OK. > Kopiere trusty714.cloop.info nach /var/linbo/ > sending incremental file list > trusty714.cloop.info > 155 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 243 bytes received 31 bytes 548.00 bytes/sec > ...OK. > setze Dateirechte von trusty714.cloop.info ...OK. ...OK. > > trusty714.cloop.macct existiert. Sicherungskopie... > sending incremental file list > trusty714.cloop.macct > 158 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 247 bytes received 31 bytes 185.33 bytes/sec > ...OK. > Kopiere trusty714.cloop.macct nach /var/linbo/ > sending incremental file list > trusty714.cloop.macct > 154 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 243 bytes received 31 bytes 548.00 bytes/sec > ...OK. > setze Dateirechte von trusty714.cloop.macct ...OK. ...OK. > > start.conf.trusty714 existiert. Sicherungskopie... > sending incremental file list > start.conf.trusty714 > 5725 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 5813 bytes received 31 bytes 11688.00 bytes/sec > ...OK. > Kopiere start.conf.trusty714 nach /var/linbo/ > sending incremental file list > start.conf.trusty714 > 5589 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 5677 bytes received 31 bytes 11416.00 bytes/sec > ...OK. > setze Dateirechte von start.conf.trusty714 ...OK. ...OK. > > trusty714.cloop.postsync existiert. Sicherungskopie... > sending incremental file list > trusty714.cloop.postsync > 4767 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 4859 bytes received 31 bytes 9780.00 bytes/sec > ...OK. > Kopiere trusty714.cloop.postsync nach /var/linbo/ > sending incremental file list > trusty714.cloop.postsync > 2805 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/1) > > sent 2897 bytes received 31 bytes 5856.00 bytes/sec > ...OK. > setze Dateirechte von trusty714.cloop.postsync ...OK. ...OK. > > Kopiere Postsync-Baum... > sending incremental file list > common/ > common/etc/ > common/etc/hosts > 463 100% 0.00kB/s 0:00:00 (xfer#1, to-check=0/3) > > sent 585 bytes received 39 bytes 1248.00 bytes/sec > total size is 463 speedup is 0.74 > Es wurden schon vorhandene Dateien mit Zeitstempel gesichert. Bitte in > /var/linb o nachsehen. > * Stopping BitTorrent service for trusty714.cloop [ > OK ] > trusty714.cloop and trusty714.cloop.torrent do not match! > Creating trusty714.cloop.torrent ... > * Stopping BitTorrent tracker bttrack.bittorrent [ > OK ] > * Starting BitTorrent tracker bttrack.bittorrent [ > OK ] > * Starting BitTorrent service for trusty714.cloop [ > OK ] > > > > Fertig > > > Am 11. Oktober 2016 um 11:49 schrieb Jesko Anschütz < > linuxmus...@morzgut.de>: > >> Hallo zusammen, >> >> unter http://cloop.linuxmuster.net gibt’s das neue xenial-default-cloop >> mit vollautomatischer Installation. >> >> Skript runterlasen, starten, warten, freuen :) >> >> LG, Jesko >> _______________________________________________ >> linuxmuster-user mailing list >> linuxmuster-user@lists.linuxmuster.net >> https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user >> > >
_______________________________________________ linuxmuster-user mailing list linuxmuster-user@lists.linuxmuster.net https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user