Jan-Bernd Themann wrote: > On Tuesday 28 August 2007 11:22, James Chapman wrote: >>> So in this scheme what runs ->poll() to process incoming packets? >>> The hrtimer? >> No, the regular NAPI networking core calls ->poll() as usual; no timers >> are involved. This scheme simply delays the napi_complete() from the >> driver so the device stays in the poll list longer. It means that its >> ->poll() will be called when there is no work to do for 1-2 jiffies, >> hence the optimization at the top of ->poll() to efficiently handle that >> case. The device's ->poll() is called by the NAPI core until it has >> continuously done no work for 1-2 jiffies, at which point it finally >> does the netif_rx_complete() and re-enables its interrupts. >> > I'm not sure if I understand your approach correctly. > This approach may reduce the number of interrupts, but it does so > by blocking the CPU for up to 1 jiffy (that can be quite some time > on some platforms). So no other application / tasklet / softIRQ type > can do anything in between.
I think I've misread the reworked NAPI net_rx_action code. I thought that it ran each device ->poll() just once, rescheduling the NET_RX softirq again if a device stayed in polled mode. I can see now that it loops while one or more devices stays in the poll list for up to a jiffy, just like it always has. So by keeping the device in the poll list and not consuming quota, net_rx_action() spins until the next jiffy tick unless another device consumes quota, like you say. I can only assume that the encouraging results that I get with this scheme are specific to my test setups (measuring packet forwarding rates). I agree that it isn't desirable to tie up the CPU for up to a jiffy in net_rx_action() in order to do this. I need to go away and rework my ideas. Perhaps it is possible to get the behavior I'm looking for by somehow special-casing the zero return from ->poll() in net_rx_action(), but I'm not sure. Thanks for asking questions. -- James Chapman Katalix Systems Ltd http://www.katalix.com Catalysts for your Embedded Linux software development _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev