A new binding for flash devices was recently introduced. This updates the
Walnut DTS to use the new binding.
Signed-off-by: Josh Boyer <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/walnut.dts | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- linux-2.6.orig/arch/powerpc/boot/dts/walnut.dts
+++ linux-2.6/arch/powerpc/boot/dts/walnut.dts
@@ -137,6 +137,10 @@
dcr-reg = <012 2>;
#address-cells = <2>;
#size-cells = <1>;
+ /* The ranges property is supplied by the bootwrapper
+ * and is based on the firmware's configuration of the
+ * EBC bridge
+ */
clock-frequency = <0>; /* Filled in by zImage */
[EMAIL PROTECTED],0 {
@@ -144,13 +148,16 @@
};
[EMAIL PROTECTED],80000 {
- device_type = "rom";
- compatible = "direct-mapped";
- probe-type = "JEDEC";
+ compatible = "jedec-flash";
bank-width = <1>;
- partitions = <0 80000>;
- partition-names = "OpenBIOS";
reg = <0 80000 80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ [EMAIL PROTECTED] {
+ label = "OpenBIOS";
+ reg = <0 80000>;
+ read-only;
+ };
};
[EMAIL PROTECTED],0 {
--
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
