Kumar Gala wrote: > > On Oct 8, 2007, at 11:19 AM, David Brownell wrote: > >>>> Near as I can tell, the original code is wrong ... the hcca->frame_no >>>> byte offset is fully specified, so that shift should always be 16. >>> >>> Are you saying that it should always be #define OHCI_BE_FRAME_NO_SHIFT >>> 16 for big endian platforms? >> >> More than that, I'm saying that shouldn't even be a #define! The >> default should be that drivers expect chips to follow the interface >> specs. Any value other than 16 violates the OHCI spec. >> >> However, based on one other post, I suspect at least one Freescale >> part will need to declare a chip quirk for this case. > > Which Freescale part do you think needs this? > > - k
I've looked at drivers/usb/host/Kconfig It seems to be MPC52xx. David, is that the one you mentioned? Thanks, Valentine. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev