The SerDes(serializer/deserializer) PHY block is a new SoC block used
in Freescale chips to support multiple serial interfaces, such as PCI
Express, SGMII, SATA.
Signed-off-by: Li Yang <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/Kconfig | 4 +
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/fsl_serdes.c | 170 ++++++++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/fsl_serdes.h | 36 ++++++++
4 files changed, 211 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/sysdev/fsl_serdes.c
create mode 100644 arch/powerpc/sysdev/fsl_serdes.h
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 19d4628..e89f803 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -291,4 +291,8 @@ config FSL_ULI1575
Freescale reference boards. The boards all use the ULI in pretty
much the same way.
+config FSL_SERDES
+ bool
+ default n
+
endmenu
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 08ce31e..315aa36 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -19,6 +19,7 @@ mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
obj-$(CONFIG_AXON_RAM) += axonram.o
+obj-$(CONFIG_FSL_SERDES) += fsl_serdes.o
# contains only the suspend handler for time
ifeq ($(CONFIG_RTC_CLASS),)
diff --git a/arch/powerpc/sysdev/fsl_serdes.c b/arch/powerpc/sysdev/fsl_serdes.c
new file mode 100644
index 0000000..8a04395
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_serdes.c
@@ -0,0 +1,170 @@
+/*
+ * arch/powerpc/sysdev/fsl_serdes.c
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <[EMAIL PROTECTED]>
+ *
+ * Freescale SerDes initialization routines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+
+#include "fsl_serdes.h"
+
+static int __init setup_serdes(struct device_node *np)
+{
+ void __iomem *regs;
+ const void *prot;
+ const unsigned int *freq;
+ struct resource res;
+ u32 tmp, rfcks;
+
+ of_address_to_resource(np, 0, &res);
+ regs = ioremap(res.start, res.end - res.start + 1);
+
+ prot = of_get_property(np, "protocol", NULL);
+ if (!prot)
+ return -EINVAL;
+ freq = of_get_property(np, "clock", NULL);
+ switch (*freq) {
+ case 100:
+ rfcks = FSL_SRDSCR4_RFCKS_100;
+ break;
+ case 125:
+ rfcks = FSL_SRDSCR4_RFCKS_125;
+ break;
+ case 150:
+ rfcks = FSL_SRDSCR4_RFCKS_150;
+ break;
+ default:
+ printk(KERN_ERR "SerDes: Wrong frequency\n");
+ return -EINVAL;
+ }
+
+ /* Use default prescale and counter */
+
+ /* 1.0V corevdd */
+ if (of_get_property(np, "vdd-1v", NULL)) {
+ /* DPPE/DPPA = 0 */
+ tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
+ tmp &= ~FSL_SRDSCR0_DPP_1V2;
+ out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
+
+ /* VDD = 0 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_VDD_1V2;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+ }
+
+ /* protocol specific configuration */
+ if (!strcmp(prot, "sata")) {
+ /* Set and clear reset bits */
+ tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
+ tmp |= FSL_SRDSRSTCTL_SATA_RESET;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+ mdelay(1);
+ tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_SATA;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
+ FSL_SRDSCR3_SDFM_SATA_PEX |
+ FSL_SRDSCR3_SDTXL_SATA;
+ out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+
+ } else if (!strcmp(prot, "pcie")) {
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp |= FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_PEX;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
+ out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
+ if (of_get_property(np, "pcie-x2", NULL))
+ tmp |= FSL_SRDSCR4_PLANE_X2;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+
+ } else if (!strcmp(prot, "sgmii")) {
+ /* Configure SRDSCR1 */
+ tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
+ tmp &= ~FSL_SRDSCR1_PLLBW;
+ out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
+
+ /* Configure SRDSCR2 */
+ tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
+ tmp &= ~FSL_SRDSCR2_SEIC_MASK;
+ tmp |= FSL_SRDSCR2_SEIC_SGMII;
+ out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
+
+ /* Configure SRDSCR3 */
+ out_be32(regs + FSL_SRDSCR3_OFFS, 0);
+
+ /* Configure SRDSCR4 */
+ tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
+ out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
+
+ } else {
+ printk(KERN_ERR "SerDes: Wrong protocol\n");
+ return -EINVAL;
+ }
+
+ /* Do a software reset */
+ tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
+ tmp |= FSL_SRDSRSTCTL_RST;
+ out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
+
+ printk(KERN_INFO "Freescale SerDes at %8x initialized\n", res.start);
+
+ return 0;
+}
+
+static int __init fsl_serdes_init(void) {
+ struct device_node *np;
+
+ for (np = NULL; (np = of_find_compatible_node(np, NULL, "fsl,serdes"))
!= NULL;)
+ setup_serdes(np);
+
+ return 0;
+}
+
+arch_initcall(fsl_serdes_init);
diff --git a/arch/powerpc/sysdev/fsl_serdes.h b/arch/powerpc/sysdev/fsl_serdes.h
new file mode 100644
index 0000000..d4e5570
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_serdes.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/* SerDes registers */
+#define FSL_SRDSCR0_OFFS 0x0
+#define FSL_SRDSCR0_DPP_1V2 0x00008800
+#define FSL_SRDSCR1_OFFS 0x4
+#define FSL_SRDSCR1_PLLBW 0x00000040
+#define FSL_SRDSCR2_OFFS 0x8
+#define FSL_SRDSCR2_VDD_1V2 0x00800000
+#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
+#define FSL_SRDSCR2_SEIC_SATA 0x00001414
+#define FSL_SRDSCR2_SEIC_PEX 0x00001010
+#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
+#define FSL_SRDSCR3_OFFS 0xc
+#define FSL_SRDSCR3_KFR_SATA 0x10100000
+#define FSL_SRDSCR3_KPH_SATA 0x04040000
+#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
+#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
+#define FSL_SRDSCR4_OFFS 0x10
+#define FSL_SRDSCR4_PROT_SATA 0x00000808
+#define FSL_SRDSCR4_PROT_PEX 0x00000101
+#define FSL_SRDSCR4_PROT_SGMII 0x00000505
+#define FSL_SRDSCR4_PLANE_X2 0x01000000
+#define FSL_SRDSCR4_RFCKS_100 0x00000000
+#define FSL_SRDSCR4_RFCKS_125 0x10000000
+#define FSL_SRDSCR4_RFCKS_150 0x30000000
+#define FSL_SRDSRSTCTL_OFFS 0x20
+#define FSL_SRDSRSTCTL_RST 0x80000000
+#define FSL_SRDSRSTCTL_SATA_RESET 0xf
--
1.5.3.2.104.g41ef
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
