> -----Original Message----- > From: Kumar Gala [mailto:[EMAIL PROTECTED] > Sent: Wednesday, October 17, 2007 9:59 PM > To: David Gibson > Cc: Li Yang-r58472; [EMAIL PROTECTED]; linuxppc-dev@ozlabs.org > Subject: Re: [PATCH v3 9/9] add MPC837x MDS board default device tree > > > On Oct 14, 2007, at 7:37 PM, David Gibson wrote: > > > On Fri, Oct 12, 2007 at 09:28:48PM +0800, Li Yang wrote: > >> Signed-off-by: Li Yang <[EMAIL PROTECTED]> > >> --- > >> arch/powerpc/boot/dts/mpc8377_mds.dts | 288 +++++++++++++++++++++ > >> +++++++++ > >> arch/powerpc/boot/dts/mpc8378_mds.dts | 268 +++++++++++++++++++++ > >> +++++++ > >> arch/powerpc/boot/dts/mpc8379_mds.dts | 308 +++++++++++++++++++++ > >> ++++++++++++ > >> 3 files changed, 864 insertions(+), 0 deletions(-) create mode > >> 100644 arch/powerpc/boot/dts/mpc8377_mds.dts > >> create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts > >> create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts > >> > >> diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts > >> b/arch/powerpc/boot/dts/mpc8377_mds.dts > > [snip] > >> + [EMAIL PROTECTED] { > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + device_type = "soc"; > >> + ranges = <0 e0000000 00100000>; > >> + reg = <e0000000 00000200>; > >> + bus-frequency = <0>; > >> + > >> + [EMAIL PROTECTED] { > >> + device_type = "watchdog"; > > > > Drop this device_type. > > > >> + compatible = "mpc83xx_wdt"; > >> + reg = <200 100>; > >> + }; > >> + > >> + [EMAIL PROTECTED] { > >> + device_type = "i2c"; > > > > And this one. > > I've asked Leo to leave this one as all other fsl boards do > this and the code depends on it. There was some discussion > about this but I wasn't sure if it was closed or not.
I'm afraid not only i2c but also watchdog and spi need device_type now. Shall we proceed removing the type check? - Leo _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
