The patch makes possible to have mdio and mdc pins on different physical ports
also for CONFIG_PPC_CPM_NEW_BINDING.
To setup it in the device tree:
reg = <10d40 14 10d60 14>; // mdc-offset: 0x10d40, mdio-offset: 0x10d60
or
reg = <10d40 14>; // mdc and mdio have the same offset 0x10d40
The approach was taken from older version.
Signed-off-by: Sergej Stepanov <[EMAIL PROTECTED]>
--
diff --git a/drivers/net/fs_enet/mii-bitbang.c
b/drivers/net/fs_enet/mii-bitbang.c
index b8e4a73..86b73ea 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -29,12 +29,16 @@
#include "fs_enet.h"
-struct bb_info {
- struct mdiobb_ctrl ctrl;
+struct bb_port {
__be32 __iomem *dir;
__be32 __iomem *dat;
- u32 mdio_msk;
- u32 mdc_msk;
+ u32 msk;
+};
+
+struct bb_info {
+ struct mdiobb_ctrl ctrl;
+ struct bb_port mdc;
+ struct bb_port mdio;
};
/* FIXME: If any other users of GPIO crop up, then these will have to
@@ -62,18 +66,18 @@ static inline void mdio_dir(struct mdiobb_ctrl *ctrl, int
dir)
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (dir)
- bb_set(bitbang->dir, bitbang->mdio_msk);
+ bb_set(bitbang->mdio.dir, bitbang->mdio.msk);
else
- bb_clr(bitbang->dir, bitbang->mdio_msk);
+ bb_clr(bitbang->mdio.dir, bitbang->mdio.msk);
/* Read back to flush the write. */
- in_be32(bitbang->dir);
+ in_be32(bitbang->mdio.dir);
}
static inline int mdio_read(struct mdiobb_ctrl *ctrl)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
- return bb_read(bitbang->dat, bitbang->mdio_msk);
+ return bb_read(bitbang->mdio.dat, bitbang->mdio.msk);
}
static inline void mdio(struct mdiobb_ctrl *ctrl, int what)
@@ -81,12 +85,12 @@ static inline void mdio(struct mdiobb_ctrl *ctrl, int what)
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (what)
- bb_set(bitbang->dat, bitbang->mdio_msk);
+ bb_set(bitbang->mdio.dat, bitbang->mdio.msk);
else
- bb_clr(bitbang->dat, bitbang->mdio_msk);
+ bb_clr(bitbang->mdio.dat, bitbang->mdio.msk);
/* Read back to flush the write. */
- in_be32(bitbang->dat);
+ in_be32(bitbang->mdio.dat);
}
static inline void mdc(struct mdiobb_ctrl *ctrl, int what)
@@ -94,12 +98,12 @@ static inline void mdc(struct mdiobb_ctrl *ctrl, int what)
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (what)
- bb_set(bitbang->dat, bitbang->mdc_msk);
+ bb_set(bitbang->mdc.dat, bitbang->mdc.msk);
else
- bb_clr(bitbang->dat, bitbang->mdc_msk);
+ bb_clr(bitbang->mdc.dat, bitbang->mdc.msk);
/* Read back to flush the write. */
- in_be32(bitbang->dat);
+ in_be32(bitbang->mdc.dat);
}
static struct mdiobb_ops bb_ops = {
@@ -114,23 +118,23 @@ static struct mdiobb_ops bb_ops = {
static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
struct device_node *np)
{
- struct resource res;
+ struct resource res[2];
const u32 *data;
int mdio_pin, mdc_pin, len;
struct bb_info *bitbang = bus->priv;
- int ret = of_address_to_resource(np, 0, &res);
+ int ret = of_address_to_resource(np, 0, &res[0]);
if (ret)
return ret;
- if (res.end - res.start < 13)
+ if (res[0].end - res[0].start < 13)
return -ENODEV;
/* This should really encode the pin number as well, but all
* we get is an int, and the odds of multiple bitbang mdio buses
* is low enough that it's not worth going too crazy.
*/
- bus->id = res.start;
+ bus->id = res[0].start;
data = of_get_property(np, "fsl,mdio-pin", &len);
if (!data || len != 4)
@@ -142,13 +146,27 @@ static int __devinit fs_mii_bitbang_init(struct mii_bus
*bus,
return -ENODEV;
mdc_pin = *data;
- bitbang->dir = ioremap(res.start, res.end - res.start + 1);
- if (!bitbang->dir)
+ bitbang->mdc.dir = ioremap(res[0].start, res[0].end - res[0].start + 1);
+ if (!bitbang->mdc.dir)
return -ENOMEM;
- bitbang->dat = bitbang->dir + 4;
- bitbang->mdio_msk = 1 << (31 - mdio_pin);
- bitbang->mdc_msk = 1 << (31 - mdc_pin);
+ bitbang->mdc.dat = bitbang->mdc.dir + 4;
+ if( !of_address_to_resource(np, 1, &res[1]))
+ {
+ bitbang->mdio.dir = ioremap(res[1].start, res[1].end -
res[1].start + 1);
+ if (!bitbang->mdio.dir)
+ {
+ iounmap(bitbang->mdc.dir);
+ return -ENOMEM;
+ }
+ bitbang->mdio.dat = bitbang->mdio.dir + 4;
+ }
+ else{
+ bitbang->mdio.dir = bitbang->mdc.dir;
+ bitbang->mdio.dat = bitbang->mdc.dat;
+ }
+ bitbang->mdio.msk = 1 << (31 - mdio_pin);
+ bitbang->mdc.msk = 1 << (31 - mdc_pin);
return 0;
}
@@ -220,7 +238,9 @@ out_free_irqs:
dev_set_drvdata(&ofdev->dev, NULL);
kfree(new_bus->irq);
out_unmap_regs:
- iounmap(bitbang->dir);
+ if ( bitbang->mdio.dir != bitbang->mdc.dir)
+ iounmap(bitbang->mdio.dir);
+ iounmap(bitbang->mdc.dir);
out_free_bus:
kfree(new_bus);
out_free_priv:
@@ -238,7 +258,9 @@ static int fs_enet_mdio_remove(struct of_device *ofdev)
free_mdio_bitbang(bus);
dev_set_drvdata(&ofdev->dev, NULL);
kfree(bus->irq);
- iounmap(bitbang->dir);
+ if ( bitbang->mdio.dir != bitbang->mdc.dir)
+ iounmap(bitbang->mdio.dir);
+ iounmap(bitbang->mdc.dir);
kfree(bitbang);
kfree(bus);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
