It appears to me that ioremap/iounmap in cpm_pic_init() is imbalanced. I am not certain about this, nor was the patch tested. please review. -- fix ioremap/iounmap imbalance
Signed-off-by: Roel Kluin <[EMAIL PROTECTED]> --- diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index f6a6378..7b1dd9c 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -152,13 +152,13 @@ unsigned int cpm_pic_init(void) cpic_reg = ioremap(res.start, res.end - res.start + 1); if (cpic_reg == NULL) goto end; sirq = irq_of_parse_and_map(np, 0); if (sirq == NO_IRQ) - goto end; + goto io_out; /* Initialize the CPM interrupt controller. */ hwirq = (unsigned int)irq_map[sirq].hwirq; out_be32(&cpic_reg->cpic_cicr, (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | ((hwirq/2) << 13) | CICR_HP_MASK); @@ -167,13 +167,13 @@ unsigned int cpm_pic_init(void) cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR, 64, &cpm_pic_host_ops, 64); if (cpm_pic_host == NULL) { printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); sirq = NO_IRQ; - goto end; + goto io_out; } /* Install our own error handler. */ np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); if (np == NULL) np = of_find_node_by_type(NULL, "cpm"); @@ -187,13 +187,15 @@ unsigned int cpm_pic_init(void) goto end; if (setup_irq(eirq, &cpm_error_irqaction)) printk(KERN_ERR "Could not allocate CPM error IRQ!"); setbits32(&cpic_reg->cpic_cicr, CICR_IEN); - + goto end; +io_out: + iounmap(cpic_reg); end: of_node_put(np); return sirq; } void __init cpm_reset(void) _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev