This wires up the 4xx PCI support & device-tree bits for the
405GP based Walnut platform.

Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---

This one is untested, haven't had time to dig my walnut and put it
back into working condition. Josh, can you verify that IRQs are
working (routing is correct ?) Thanks !

 arch/powerpc/boot/dts/walnut.dts   |   39 +++++++++++++++++++++++++++++++++++++
 arch/powerpc/platforms/40x/Kconfig |    1 
 2 files changed, 40 insertions(+)

--- linux-merge.orig/arch/powerpc/boot/dts/walnut.dts   2007-12-21 
14:10:33.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/walnut.dts        2007-12-21 
14:12:36.000000000 +1100
@@ -190,6 +190,45 @@
                                virtual-reg = <f0300005>;
                        };
                };
+
+               PCI0: [EMAIL PROTECTED] {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+                       primary;
+                       reg = <eec00000 8       /* Config space access */
+                              eed80000 4       /* IACK */
+                              eed80000 4       /* Special cycle */
+                              ef480000 40>;    /* Internal registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed. Chip supports a second
+                        * IO range but we don't use it for now
+                        */
+                       ranges = <02000000 0 80000000 80000000 0 20000000
+                                 01000000 0 00000000 e8000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* Walnut has all 4 IRQ pins tied together per slot */
+                       interrupt-map-mask = <f800 0 0 0>;
+                       interrupt-map = <
+                               /* IDSEL 1 */
+                               0800 0 0 0 &UIC0 1c 8
+
+                               /* IDSEL 2 */
+                               1000 0 0 0 &UIC0 1d 8
+
+                               /* IDSEL 3 */
+                               1800 0 0 0 &UIC0 1e 8
+
+                               /* IDSEL 4 */
+                               2000 0 0 0 &UIC0 1f 8
+                       >;
+               };
        };
 
        chosen {
Index: linux-merge/arch/powerpc/platforms/40x/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/Kconfig 2007-12-21 
14:12:52.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/Kconfig      2007-12-21 
14:12:55.000000000 +1100
@@ -59,6 +59,7 @@ config WALNUT
        depends on 40x
        default y
        select 405GP
+       select PCI
        help
          This option enables support for the IBM PPC405GP evaluation board.
 
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to