On Sun, Sep 25, 2016 at 12:19PM -0500, Scott Wood wrote: > -----Original Message----- > From: Scott Wood [mailto:o...@buserror.net] > Sent: Sunday, September 25, 2016 12:19 PM > To: Qiang Zhao <qiang.z...@nxp.com> > Cc: linuxppc-dev@lists.ozlabs.org; pku....@gmail.com; X.B. Xie > <xiaobo....@nxp.com>; linux-ker...@vger.kernel.org > Subject: Re: [v6,2/2] QE: remove PPCisms for QE > > On Sat, Sep 24, 2016 at 11:14:11PM -0500, Scott Wood wrote: > > On Fri, Sep 23, 2016 at 10:20:32AM +0800, Zhao Qiang wrote: > > > QE was supported on PowerPC, and dependent on PPC, Now it is > > > supported on other platforms. so remove PPCisms. > > > > > > Signed-off-by: Zhao Qiang <qiang.z...@nxp.com> > > > --- > > > Changes for v2: > > > - na > > > Changes for v3: > > > - add NO_IRQ > > > Changes for v4: > > > - modify spin_event_timeout to opencoded timeout loop > > > - remove NO_IRQ > > > - modify virq_to_hw to opencoed code Changes for v5: > > > - modify commit msg > > > - modify depends of QUICC_ENGINE > > > - add kerneldoc header for qe_issue_cmd Changes for v6: > > > - add dependency on FSL_SOC and PPC32 for drivers > > > depending on QUICC_ENGING but not available on ARM > > > > > > drivers/irqchip/qe_ic.c | 28 +++++++----- > > > drivers/net/ethernet/freescale/Kconfig | 10 ++--- > > > drivers/soc/fsl/qe/Kconfig | 2 +- > > > drivers/soc/fsl/qe/qe.c | 80 > > > ++++++++++++++++++++-------------- > > > drivers/soc/fsl/qe/qe_io.c | 42 ++++++++---------- > > > drivers/soc/fsl/qe/qe_tdm.c | 8 ++-- > > > drivers/soc/fsl/qe/ucc.c | 10 ++--- > > > drivers/soc/fsl/qe/ucc_fast.c | 68 ++++++++++++++--------------- > > > drivers/tty/serial/Kconfig | 2 +- > > > drivers/usb/gadget/udc/Kconfig | 2 +- > > > drivers/usb/host/Kconfig | 2 +- > > > include/soc/fsl/qe/qe.h | 1 - > > > include/soc/fsl/qe/qe_ic.h | 12 ++--- > > > 13 files changed, 141 insertions(+), 126 deletions(-) > > > > I assume this means you'll be updating > > http://patchwork.ozlabs.org/patch/654473/ > > to be based on top of this... > > Apparently that assumption was wrong, since I now see that you're patching > drivers/irqchip/qe_ic.c rather than drivers/soc/fsl/qe/qe_ic.c. > Please keep the drivers/irqchip stuff separate and send to the appropriate > maintainers. >
You means separate drivers/irqchip/qe_ic.c part from this patch and send it with the other qe_ic patches? Is it acceptable if I modify qe_ic.c with drivers/soc/fsl/qe/qe_ic.c, then send qe_ic patches to move qe_ic to drivers/irqchip? BR -Zhao Qiang