Hi Joao,

On Friday 13 January 2017 10:19 PM, Joao Pinto wrote:
> Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu:
>> Split pcie-designware.c into pcie-designware-host.c that contains
>> the host specific parts of the driver and pcie-designware.c that
>> contains the parts used by both host driver and endpoint driver.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>> ---
>>  drivers/pci/dwc/Makefile               |    2 +-
>>  drivers/pci/dwc/pcie-designware-host.c |  619 
>> ++++++++++++++++++++++++++++++++
>>  drivers/pci/dwc/pcie-designware.c      |  613 
>> +------------------------------
>>  drivers/pci/dwc/pcie-designware.h      |    8 +
>>  4 files changed, 634 insertions(+), 608 deletions(-)
>>  create mode 100644 drivers/pci/dwc/pcie-designware-host.c
>>
>> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
>> index 7d27c14..3b57e55 100644
>> --- a/drivers/pci/dwc/Makefile
>> +++ b/drivers/pci/dwc/Makefile
>> @@ -1,4 +1,4 @@
> 
> (snip...)
> 
>> -static void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
>> -                                  int type, u64 cpu_addr, u64 pci_addr,
>> -                                  u32 size)
>> +void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
>> +                           u64 cpu_addr, u64 pci_addr, u32 size)
>>  {
>>      u32 retries, val;
>>  
>> @@ -186,220 +151,6 @@ static void dw_pcie_prog_outbound_atu(struct dw_pcie 
>> *pci, int index,
>>      dev_err(pci->dev, "iATU is not being enabled\n");
>>  }
> 
> Kishon, iATU only makes sense in The Root Complex (host), so it should be 
> inside
> the pcie-designware-host.

That is not true. Outbound ATU should be programmed to access host side buffers
and inbound ATU should be programmed for the host to access EP mem space.

Thanks
Kishon

Reply via email to