On Mon, Jan 21, Grant Likely wrote: > On 1/21/08, Olaf Hering <[EMAIL PROTECTED]> wrote: > > > > Efika boards have to be booted with console=ttyPSC0 unless there is a > > graphics card plugged in. Detect if the firmware stdout is the serial > > connector. > > > > Signed-off-by: Olaf Hering <[EMAIL PROTECTED]> > > Hrrrum; I think this is a good idea, but I'm not thrilled with the > approach. Here are my concerns: > > - Determining that linux,stdout-path points to a PSC should should be > done in common code. It's useful for all 5200 boards, not just the > Efika. (However, if 'failsafe' processing is efika specific, then it > can stay in efika.c). This might be best done within the PSC driver > itself, but I'm not sure. > - Recognizing a psc node should be done by inspecting the compatible > property, not by device_type and model properties.
I dont have any other 5200 hardware to test a different patch. Please improve my version and submit it for inclusion. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev