Hi,
On Friday 10 November 2017 09:18 AM, Bao Xiaowei wrote:
> Add the pcie controller ep function support of layerscape base on
> pcie ep framework.
>
> Signed-off-by: Bao Xiaowei <xiaowei....@nxp.com>
> ---
> v2:
> - fix the ioremap function used but no ioumap issue
> - optimize the code structure
> - add code comments
> v3:
> - fix the msi outband window request failed issue
> v4:
> - optimize the code, adjust the format
>
> drivers/pci/dwc/pci-layerscape.c | 120
> ++++++++++++++++++++++++++++++++++++---
> 1 file changed, 113 insertions(+), 7 deletions(-)
$subject should begin with
PCI: layerscape:
>
> diff --git a/drivers/pci/dwc/pci-layerscape.c
> b/drivers/pci/dwc/pci-layerscape.c
> index 87fa486bee2c..6f3e434599e0 100644
> --- a/drivers/pci/dwc/pci-layerscape.c
> +++ b/drivers/pci/dwc/pci-layerscape.c
> @@ -34,7 +34,12 @@
> /* PEX Internal Configuration Registers */
> #define PCIE_STRFMR1 0x71c /* Symbol Timer & Filter Mask Register1 */
>
> +#define PCIE_DBI2_BASE 0x1000 /* DBI2 base address*/
The base address should come from dt.
> +#define PCIE_MSI_MSG_DATA_OFF 0x5c /* MSI Data register address*/
> +#define PCIE_MSI_OB_SIZE 4096
> +#define PCIE_MSI_ADDR_OFFSET (1024 * 1024)
> #define PCIE_IATU_NUM 6
> +#define PCIE_EP_ADDR_SPACE_SIZE 0x100000000
>
> struct ls_pcie_drvdata {
> u32 lut_offset;
> @@ -44,12 +49,20 @@ struct ls_pcie_drvdata {
> const struct dw_pcie_ops *dw_pcie_ops;
> };
>
> +struct ls_pcie_ep {
> + dma_addr_t msi_phys_addr;
> + void __iomem *msi_virt_addr;
> + u64 msi_msg_addr;
> + u16 msi_msg_data;
> +};
> +
> struct ls_pcie {
> struct dw_pcie *pci;
> void __iomem *lut;
> struct regmap *scfg;
> const struct ls_pcie_drvdata *drvdata;
> int index;
> + struct ls_pcie_ep *pcie_ep;
> };
>
> #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
> @@ -263,6 +276,99 @@ static const struct of_device_id ls_pcie_of_match[] = {
> { },
> };
>
> +static void ls_pcie_raise_msi_irq(struct ls_pcie_ep *pcie_ep)
> +{
> + iowrite32(pcie_ep->msi_msg_data, pcie_ep->msi_virt_addr);
> +}
> +
> +static int ls_pcie_raise_irq(struct dw_pcie_ep *ep,
> + enum pci_epc_irq_type type, u8 interrupt_num)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + struct ls_pcie *pcie = to_ls_pcie(pci);
> + struct ls_pcie_ep *pcie_ep = pcie->pcie_ep;
> + u32 free_win;
> +
> + /* get the msi message address and msi message data */
> + pcie_ep->msi_msg_addr = ioread32(pci->dbi_base + MSI_MESSAGE_ADDR_L32) |
> + (((u64)ioread32(pci->dbi_base + MSI_MESSAGE_ADDR_U32)) << 32);
> + pcie_ep->msi_msg_data = ioread16(pci->dbi_base + PCIE_MSI_MSG_DATA_OFF);
> +
> + /* request and config the outband window for msi */
> + free_win = find_first_zero_bit(&ep->ob_window_map,
> + sizeof(ep->ob_window_map));
> + if (free_win >= ep->num_ob_windows) {
> + dev_err(pci->dev, "no free outbound window\n");
> + return -ENOMEM;
> + }
> +
> + dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> + pcie_ep->msi_phys_addr,
> + pcie_ep->msi_msg_addr,
> + PCIE_MSI_OB_SIZE);
> +
> + set_bit(free_win, &ep->ob_window_map);
This custom logic is not required. You can use [1] instead
[1] -> https://lkml.org/lkml/2017/11/3/318
> +
> + /* generate the msi interrupt */
> + ls_pcie_raise_msi_irq(pcie_ep);
> +
> + /* release the outband window of msi */
> + dw_pcie_disable_atu(pci, free_win, DW_PCIE_REGION_OUTBOUND);
> + clear_bit(free_win, &ep->ob_window_map);
> +
> + return 0;
> +}
> +
> +static struct dw_pcie_ep_ops pcie_ep_ops = {
> + .raise_irq = ls_pcie_raise_irq,
> +};
> +
> +static int __init ls_add_pcie_ep(struct ls_pcie *pcie,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = pcie->pci;
> + struct device *dev = pci->dev;
> + struct dw_pcie_ep *ep;
> + struct ls_pcie_ep *pcie_ep;
> + struct resource *cfg_res;
> + int ret;
> +
> + ep = &pci->ep;
> + ep->ops = &pcie_ep_ops;
> +
> + pcie_ep = devm_kzalloc(dev, sizeof(*pcie_ep), GFP_KERNEL);
> + if (!pcie_ep)
> + return -ENOMEM;
> +
> + pcie->pcie_ep = pcie_ep;
> +
> + cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
> + if (cfg_res) {
> + ep->phys_base = cfg_res->start;
> + ep->addr_size = PCIE_EP_ADDR_SPACE_SIZE;
> + } else {
> + dev_err(dev, "missing *config* space\n");
> + return -ENODEV;
> + }
> +
> + pcie_ep->msi_phys_addr = ep->phys_base + PCIE_MSI_ADDR_OFFSET;
> +
> + pcie_ep->msi_virt_addr = ioremap(pcie_ep->msi_phys_addr,
> + PCIE_MSI_OB_SIZE);
> + if (!pcie_ep->msi_virt_addr) {
> + dev_err(dev, "failed to map MSI outbound region\n");
> + return -ENOMEM;
> + }
> +
> + ret = dw_pcie_ep_init(ep);
> + if (ret) {
> + dev_err(dev, "failed to initialize endpoint\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static int __init ls_add_pcie_port(struct ls_pcie *pcie)
> {
> struct dw_pcie *pci = pcie->pci;
> @@ -309,18 +415,18 @@ static int __init ls_pcie_probe(struct platform_device
> *pdev)
> if (IS_ERR(pci->dbi_base))
> return PTR_ERR(pci->dbi_base);
>
> - pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset;
> + pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_BASE;
>
> - if (!ls_pcie_is_bridge(pcie))
> - return -ENODEV;
> + pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset;
>
> platform_set_drvdata(pdev, pcie);
>
> - ret = ls_add_pcie_port(pcie);
> - if (ret < 0)
> - return ret;
> + if (!ls_pcie_is_bridge(pcie))
> + ret = ls_add_pcie_ep(pcie, pdev);
HOST or EP mode should be obtained directly from dt.
Thanks
Kishon
