The hw_params() overwrites i2s_net settings for special cases like
mono-channel support, however, it doesn't update ssi->i2s_net as
set_dai_fmt() does.
This patch removes the local i2s_net variable and directly updates
ssi->i2s_net in the hw_params() so that the driver can simply look
up the ssi->i2s_net instead of reading the register.
Signed-off-by: Nicolin Chen <nicoleots...@gmail.com>
Tested-by: Caleb Crome <ca...@crome.org>
---
sound/soc/fsl/fsl_ssi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 001e453..9847a1d 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -838,16 +838,16 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream
*substream,
}
if (!fsl_ssi_is_ac97(ssi)) {
- u8 i2s_net;
/* Normal + Network mode to send 16-bit data in 32-bit frames */
if (fsl_ssi_is_i2s_cbm_cfs(ssi) && sample_size == 16)
- i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET;
- else
- i2s_net = ssi->i2s_net;
+ ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET;
+
+ /* Use Normal mode to send mono data at 1st slot of 2 slots */
+ if (channels == 1)
+ ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL;
regmap_update_bits(regs, REG_SSI_SCR,
- SSI_SCR_I2S_NET_MASK,
- channels == 1 ? 0 : i2s_net);
+ SSI_SCR_I2S_NET_MASK, ssi->i2s_net);
}
/* In synchronous mode, the SSI uses STCCR for capture */
--
2.7.4
