On Feb 18, 2008 10:47 AM, Scott Wood <[EMAIL PROTECTED]> wrote:
> On Mon, Feb 18, 2008 at 01:43:52PM +0100, Laurent Pinchart wrote:
> > Should I put IP core nodes as children of the FPGA node ?
>
> You could do that as well.
I'd recommend doing that, then your subnodes are isolated from changes
to the bus attachment (chipselect). (really an insignificant point,
but I think it is a more logical layout).
So, something like this:
[EMAIL PROTECTED],0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 4 0 00100000>;
/* breakdown of 'ranges' fields: */
/* "0": start address of internal range */
/* "4 0": start address of external range (chip select 4, address 0) */
/* "00100000: size of range */
[EMAIL PROTECTED] {
compatible = "foo,bar";
reg = <0 00010000>;
};
[EMAIL PROTECTED] {
compatible = "foo,bar";
reg = <10000 00010000>;
};
[EMAIL PROTECTED] {
compatible = "foo,bar";
reg = <20000 00010000>;
};
};
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev