The platform feature calls in the suspend method switched off cable
power, but the calls in the resume method did not switch it back on.

Add the necessary feature call to .resume.  Also add the corresponding
call to .suspend to make .suspend's behavior explicitly the same on all
PMacs.

Signed-off-by: Stefan Richter <[EMAIL PROTECTED]>
---
 drivers/ieee1394/ohci1394.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Index: linux/drivers/ieee1394/ohci1394.c
===================================================================
--- linux.orig/drivers/ieee1394/ohci1394.c
+++ linux/drivers/ieee1394/ohci1394.c
@@ -3340,8 +3340,10 @@ static int ohci1394_pci_suspend(struct p
        if (machine_is(powermac)) {
                struct device_node *ofn = pci_device_to_OF_node(pdev);
 
-               if (ofn)
+               if (ofn) {
                        pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+                       pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
+               }
        }
 #endif /* CONFIG_PPC_PMAC */
 
@@ -3365,8 +3367,10 @@ static int ohci1394_pci_resume(struct pc
        if (machine_is(powermac)) {
                struct device_node *ofn = pci_device_to_OF_node(pdev);
 
-               if (ofn)
+               if (ofn) {
+                       pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
                        pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+               }
        }
 #endif /* CONFIG_PPC_PMAC */
 

-- 
Stefan Richter
-=====-==--- --== ----=
http://arcgraph.de/sr/

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to