> Thanks > > The following seems important also : > > /* > interrupts = <18 2>; > */ > /* interrupts number are coded in hexa ! */ > interrupts = <12 2 19 2 1a 2 1b 2 35 2 36 2 37 2>; > > I have replaced the interrupts spec in comments by the longer interrupts spec > below, and it seems to have some positive effect, but I do not know > precisely what I have described there. > > I know that 25, 26, 27, 53, 54 and 55 decimal i(hence 19, 1a etc...) are the > interrupts numbers that I had in the ARCH=ppc version. I added 18 because > of the error message, but it did not help.
Where is this ? (What node ?) The above looks like the interrupt spec for a single device with 7 interrupts, is that what you are trying to do ? If not, then it's incorrect, you have to figure the interrupt-map out (it's really not -that- hard). Ben. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev