Reviewed-by: David Gibson <da...@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <pau...@ozlabs.org>
---
arch/powerpc/include/asm/asm-prototypes.h | 5 +
arch/powerpc/kvm/book3s_hv_interrupts.S | 95 ++++----
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 363 ++++++++++++++++--------------
3 files changed, 253 insertions(+), 210 deletions(-)
diff --git a/arch/powerpc/include/asm/asm-prototypes.h
b/arch/powerpc/include/asm/asm-prototypes.h
index 1f4691c..024e8fc 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -150,4 +150,9 @@ extern s32 patch__memset_nocache, patch__memcpy_nocache;
extern long flush_count_cache;
+void kvmhv_save_host_pmu(void);
+void kvmhv_load_host_pmu(void);
+void kvmhv_save_guest_pmu(struct kvm_vcpu *vcpu, bool pmu_in_use);
+void kvmhv_load_guest_pmu(struct kvm_vcpu *vcpu);
+
#endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S
b/arch/powerpc/kvm/book3s_hv_interrupts.S
index 666b91c..a6d1001 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -64,52 +64,7 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
/* Save host PMU registers */
-BEGIN_FTR_SECTION
- /* Work around P8 PMAE bug */
- li r3, -1
- clrrdi r3, r3, 10
- mfspr r8, SPRN_MMCR2
- mtspr SPRN_MMCR2, r3 /* freeze all counters using MMCR2 */
- isync
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
- li r3, 1
- sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
- mfspr r7, SPRN_MMCR0 /* save MMCR0 */
- mtspr SPRN_MMCR0, r3 /* freeze all counters, disable
interrupts */
- mfspr r6, SPRN_MMCRA
- /* Clear MMCRA in order to disable SDAR updates */
- li r5, 0
- mtspr SPRN_MMCRA, r5
- isync
- lbz r5, PACA_PMCINUSE(r13) /* is the host using the PMU? */
- cmpwi r5, 0
- beq 31f /* skip if not */
- mfspr r5, SPRN_MMCR1
- mfspr r9, SPRN_SIAR
- mfspr r10, SPRN_SDAR
- std r7, HSTATE_MMCR0(r13)
- std r5, HSTATE_MMCR1(r13)
- std r6, HSTATE_MMCRA(r13)
- std r9, HSTATE_SIAR(r13)
- std r10, HSTATE_SDAR(r13)
-BEGIN_FTR_SECTION
- mfspr r9, SPRN_SIER
- std r8, HSTATE_MMCR2(r13)
- std r9, HSTATE_SIER(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
- mfspr r3, SPRN_PMC1
- mfspr r5, SPRN_PMC2
- mfspr r6, SPRN_PMC3
- mfspr r7, SPRN_PMC4
- mfspr r8, SPRN_PMC5
- mfspr r9, SPRN_PMC6
- stw r3, HSTATE_PMC1(r13)
- stw r5, HSTATE_PMC2(r13)
- stw r6, HSTATE_PMC3(r13)
- stw r7, HSTATE_PMC4(r13)
- stw r8, HSTATE_PMC5(r13)
- stw r9, HSTATE_PMC6(r13)
-31:
+ bl kvmhv_save_host_pmu
/*
* Put whatever is in the decrementer into the
@@ -161,3 +116,51 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
ld r0, PPC_LR_STKOFF(r1)
mtlr r0
blr
+
+_GLOBAL(kvmhv_save_host_pmu)
+BEGIN_FTR_SECTION
+ /* Work around P8 PMAE bug */
+ li r3, -1
+ clrrdi r3, r3, 10
+ mfspr r8, SPRN_MMCR2
+ mtspr SPRN_MMCR2, r3 /* freeze all counters using MMCR2 */
+ isync
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ li r3, 1
+ sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
+ mfspr r7, SPRN_MMCR0 /* save MMCR0 */
+ mtspr SPRN_MMCR0, r3 /* freeze all counters, disable
interrupts */
+ mfspr r6, SPRN_MMCRA
+ /* Clear MMCRA in order to disable SDAR updates */
+ li r5, 0
+ mtspr SPRN_MMCRA, r5
+ isync
+ lbz r5, PACA_PMCINUSE(r13) /* is the host using the PMU? */
+ cmpwi r5, 0
+ beq 31f /* skip if not */
+ mfspr r5, SPRN_MMCR1
+ mfspr r9, SPRN_SIAR
+ mfspr r10, SPRN_SDAR
+ std r7, HSTATE_MMCR0(r13)
+ std r5, HSTATE_MMCR1(r13)
+ std r6, HSTATE_MMCRA(r13)
+ std r9, HSTATE_SIAR(r13)
+ std r10, HSTATE_SDAR(r13)
+BEGIN_FTR_SECTION
+ mfspr r9, SPRN_SIER
+ std r8, HSTATE_MMCR2(r13)
+ std r9, HSTATE_SIER(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ mfspr r3, SPRN_PMC1
+ mfspr r5, SPRN_PMC2
+ mfspr r6, SPRN_PMC3
+ mfspr r7, SPRN_PMC4
+ mfspr r8, SPRN_PMC5
+ mfspr r9, SPRN_PMC6
+ stw r3, HSTATE_PMC1(r13)
+ stw r5, HSTATE_PMC2(r13)
+ stw r6, HSTATE_PMC3(r13)
+ stw r7, HSTATE_PMC4(r13)
+ stw r8, HSTATE_PMC5(r13)
+ stw r9, HSTATE_PMC6(r13)
+31: blr
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 6752da1..5b2ae34 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -28,6 +28,7 @@
#include <asm/exception-64s.h>
#include <asm/kvm_book3s_asm.h>
#include <asm/book3s/64/mmu-hash.h>
+#include <asm/export.h>
#include <asm/tm.h>
#include <asm/opal.h>
#include <asm/xive-regs.h>
@@ -113,45 +114,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
mtspr SPRN_SPRG_VDSO_WRITE,r3
/* Reload the host's PMU registers */
- lbz r4, PACA_PMCINUSE(r13) /* is the host using the PMU? */
- cmpwi r4, 0
- beq 23f /* skip if not */
-BEGIN_FTR_SECTION
- ld r3, HSTATE_MMCR0(r13)
- andi. r4, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
- cmpwi r4, MMCR0_PMAO
- beql kvmppc_fix_pmao
-END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
- lwz r3, HSTATE_PMC1(r13)
- lwz r4, HSTATE_PMC2(r13)
- lwz r5, HSTATE_PMC3(r13)
- lwz r6, HSTATE_PMC4(r13)
- lwz r8, HSTATE_PMC5(r13)
- lwz r9, HSTATE_PMC6(r13)
- mtspr SPRN_PMC1, r3
- mtspr SPRN_PMC2, r4
- mtspr SPRN_PMC3, r5
- mtspr SPRN_PMC4, r6
- mtspr SPRN_PMC5, r8
- mtspr SPRN_PMC6, r9
- ld r3, HSTATE_MMCR0(r13)
- ld r4, HSTATE_MMCR1(r13)
- ld r5, HSTATE_MMCRA(r13)
- ld r6, HSTATE_SIAR(r13)
- ld r7, HSTATE_SDAR(r13)
- mtspr SPRN_MMCR1, r4
- mtspr SPRN_MMCRA, r5
- mtspr SPRN_SIAR, r6
- mtspr SPRN_SDAR, r7
-BEGIN_FTR_SECTION
- ld r8, HSTATE_MMCR2(r13)
- ld r9, HSTATE_SIER(r13)
- mtspr SPRN_MMCR2, r8
- mtspr SPRN_SIER, r9
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
- mtspr SPRN_MMCR0, r3
- isync
-23:
+ bl kvmhv_load_host_pmu
/*
* Reload DEC. HDEC interrupts were disabled when
@@ -805,57 +768,12 @@ END_FTR_SECTION(CPU_FTR_TM | CPU_FTR_P9_TM_HV_ASSIST, 0)
91:
#endif
- /* Load guest PMU registers */
- /* R4 is live here (vcpu pointer) */
- li r3, 1
- sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
- mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */
- isync
-BEGIN_FTR_SECTION
- ld r3, VCPU_MMCR(r4)
- andi. r5, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
- cmpwi r5, MMCR0_PMAO
- beql kvmppc_fix_pmao
-END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
- lwz r3, VCPU_PMC(r4) /* always load up guest PMU registers */
- lwz r5, VCPU_PMC + 4(r4) /* to prevent information leak */
- lwz r6, VCPU_PMC + 8(r4)
- lwz r7, VCPU_PMC + 12(r4)
- lwz r8, VCPU_PMC + 16(r4)
- lwz r9, VCPU_PMC + 20(r4)
- mtspr SPRN_PMC1, r3
- mtspr SPRN_PMC2, r5
- mtspr SPRN_PMC3, r6
- mtspr SPRN_PMC4, r7
- mtspr SPRN_PMC5, r8
- mtspr SPRN_PMC6, r9
- ld r3, VCPU_MMCR(r4)
- ld r5, VCPU_MMCR + 8(r4)
- ld r6, VCPU_MMCR + 16(r4)
- ld r7, VCPU_SIAR(r4)
- ld r8, VCPU_SDAR(r4)
- mtspr SPRN_MMCR1, r5
- mtspr SPRN_MMCRA, r6
- mtspr SPRN_SIAR, r7
- mtspr SPRN_SDAR, r8
-BEGIN_FTR_SECTION
- ld r5, VCPU_MMCR + 24(r4)
- ld r6, VCPU_SIER(r4)
- mtspr SPRN_MMCR2, r5
- mtspr SPRN_SIER, r6
-BEGIN_FTR_SECTION_NESTED(96)
- lwz r7, VCPU_PMC + 24(r4)
- lwz r8, VCPU_PMC + 28(r4)
- ld r9, VCPU_MMCR + 32(r4)
- mtspr SPRN_SPMC1, r7
- mtspr SPRN_SPMC2, r8
- mtspr SPRN_MMCRS, r9
-END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
- mtspr SPRN_MMCR0, r3
- isync
+ /* Load guest PMU registers; r4 = vcpu pointer here */
+ mr r3, r4
+ bl kvmhv_load_guest_pmu
/* Load up FP, VMX and VSX registers */
+ ld r4, HSTATE_KVM_VCPU(r13)
bl kvmppc_load_fp
ld r14, VCPU_GPR(R14)(r4)
@@ -1766,83 +1684,12 @@ END_FTR_SECTION(CPU_FTR_TM | CPU_FTR_P9_TM_HV_ASSIST, 0)
25:
/* Save PMU registers if requested */
/* r8 and cr0.eq are live here */
-BEGIN_FTR_SECTION
- /*
- * POWER8 seems to have a hardware bug where setting
- * MMCR0[PMAE] along with MMCR0[PMC1CE] and/or MMCR0[PMCjCE]
- * when some counters are already negative doesn't seem
- * to cause a performance monitor alert (and hence interrupt).
- * The effect of this is that when saving the PMU state,
- * if there is no PMU alert pending when we read MMCR0
- * before freezing the counters, but one becomes pending
- * before we read the counters, we lose it.
- * To work around this, we need a way to freeze the counters
- * before reading MMCR0. Normally, freezing the counters
- * is done by writing MMCR0 (to set MMCR0[FC]) which
- * unavoidably writes MMCR0[PMA0] as well. On POWER8,
- * we can also freeze the counters using MMCR2, by writing
- * 1s to all the counter freeze condition bits (there are
- * 9 bits each for 6 counters).
- */
- li r3, -1 /* set all freeze bits */
- clrrdi r3, r3, 10
- mfspr r10, SPRN_MMCR2
- mtspr SPRN_MMCR2, r3
- isync
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
- li r3, 1
- sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
- mfspr r4, SPRN_MMCR0 /* save MMCR0 */
- mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */
- mfspr r6, SPRN_MMCRA
- /* Clear MMCRA in order to disable SDAR updates */
- li r7, 0
- mtspr SPRN_MMCRA, r7
- isync
+ mr r3, r9
+ li r4, 1
beq 21f /* if no VPA, save PMU stuff anyway */
- lbz r7, LPPACA_PMCINUSE(r8)
- cmpwi r7, 0 /* did they ask for PMU stuff to be
saved? */
- bne 21f
- std r3, VCPU_MMCR(r9) /* if not, set saved MMCR0 to FC */
- b 22f
-21: mfspr r5, SPRN_MMCR1
- mfspr r7, SPRN_SIAR
- mfspr r8, SPRN_SDAR
- std r4, VCPU_MMCR(r9)
- std r5, VCPU_MMCR + 8(r9)
- std r6, VCPU_MMCR + 16(r9)
-BEGIN_FTR_SECTION
- std r10, VCPU_MMCR + 24(r9)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
- std r7, VCPU_SIAR(r9)
- std r8, VCPU_SDAR(r9)
- mfspr r3, SPRN_PMC1
- mfspr r4, SPRN_PMC2
- mfspr r5, SPRN_PMC3
- mfspr r6, SPRN_PMC4
- mfspr r7, SPRN_PMC5
- mfspr r8, SPRN_PMC6
- stw r3, VCPU_PMC(r9)
- stw r4, VCPU_PMC + 4(r9)
- stw r5, VCPU_PMC + 8(r9)
- stw r6, VCPU_PMC + 12(r9)
- stw r7, VCPU_PMC + 16(r9)
- stw r8, VCPU_PMC + 20(r9)
-BEGIN_FTR_SECTION
- mfspr r5, SPRN_SIER
- std r5, VCPU_SIER(r9)
-BEGIN_FTR_SECTION_NESTED(96)
- mfspr r6, SPRN_SPMC1
- mfspr r7, SPRN_SPMC2
- mfspr r8, SPRN_MMCRS
- stw r6, VCPU_PMC + 24(r9)
- stw r7, VCPU_PMC + 28(r9)
- std r8, VCPU_MMCR + 32(r9)
- lis r4, 0x8000
- mtspr SPRN_MMCRS, r4
-END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
-22:
+ lbz r4, LPPACA_PMCINUSE(r8)
+21: bl kvmhv_save_guest_pmu
+ ld r9, HSTATE_KVM_VCPU(r13)
/* Restore host values of some registers */
BEGIN_FTR_SECTION
@@ -3388,6 +3235,194 @@ kvmppc_msr_interrupt:
blr
/*
+ * Load up guest PMU state. R3 points to the vcpu struct.
+ */
+_GLOBAL(kvmhv_load_guest_pmu)
+EXPORT_SYMBOL_GPL(kvmhv_load_guest_pmu)
+ mr r4, r3
+ mflr r0
+ li r3, 1
+ sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
+ mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */
+ isync
+BEGIN_FTR_SECTION
+ ld r3, VCPU_MMCR(r4)
+ andi. r5, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
+ cmpwi r5, MMCR0_PMAO
+ beql kvmppc_fix_pmao
+END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
+ lwz r3, VCPU_PMC(r4) /* always load up guest PMU registers */
+ lwz r5, VCPU_PMC + 4(r4) /* to prevent information leak */
+ lwz r6, VCPU_PMC + 8(r4)
+ lwz r7, VCPU_PMC + 12(r4)
+ lwz r8, VCPU_PMC + 16(r4)
+ lwz r9, VCPU_PMC + 20(r4)
+ mtspr SPRN_PMC1, r3
+ mtspr SPRN_PMC2, r5
+ mtspr SPRN_PMC3, r6
+ mtspr SPRN_PMC4, r7
+ mtspr SPRN_PMC5, r8
+ mtspr SPRN_PMC6, r9
+ ld r3, VCPU_MMCR(r4)
+ ld r5, VCPU_MMCR + 8(r4)
+ ld r6, VCPU_MMCR + 16(r4)
+ ld r7, VCPU_SIAR(r4)
+ ld r8, VCPU_SDAR(r4)
+ mtspr SPRN_MMCR1, r5
+ mtspr SPRN_MMCRA, r6
+ mtspr SPRN_SIAR, r7
+ mtspr SPRN_SDAR, r8
+BEGIN_FTR_SECTION
+ ld r5, VCPU_MMCR + 24(r4)
+ ld r6, VCPU_SIER(r4)
+ mtspr SPRN_MMCR2, r5
+ mtspr SPRN_SIER, r6
+BEGIN_FTR_SECTION_NESTED(96)
+ lwz r7, VCPU_PMC + 24(r4)
+ lwz r8, VCPU_PMC + 28(r4)
+ ld r9, VCPU_MMCR + 32(r4)
+ mtspr SPRN_SPMC1, r7
+ mtspr SPRN_SPMC2, r8
+ mtspr SPRN_MMCRS, r9
+END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ mtspr SPRN_MMCR0, r3
+ isync
+ mtlr r0
+ blr
+
+/*
+ * Reload host PMU state saved in the PACA by kvmhv_save_host_pmu.
+ */
+_GLOBAL(kvmhv_load_host_pmu)
+EXPORT_SYMBOL_GPL(kvmhv_load_host_pmu)
+ mflr r0
+ lbz r4, PACA_PMCINUSE(r13) /* is the host using the PMU? */
+ cmpwi r4, 0
+ beq 23f /* skip if not */
+BEGIN_FTR_SECTION
+ ld r3, HSTATE_MMCR0(r13)
+ andi. r4, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
+ cmpwi r4, MMCR0_PMAO
+ beql kvmppc_fix_pmao
+END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
+ lwz r3, HSTATE_PMC1(r13)
+ lwz r4, HSTATE_PMC2(r13)
+ lwz r5, HSTATE_PMC3(r13)
+ lwz r6, HSTATE_PMC4(r13)
+ lwz r8, HSTATE_PMC5(r13)
+ lwz r9, HSTATE_PMC6(r13)
+ mtspr SPRN_PMC1, r3
+ mtspr SPRN_PMC2, r4
+ mtspr SPRN_PMC3, r5
+ mtspr SPRN_PMC4, r6
+ mtspr SPRN_PMC5, r8
+ mtspr SPRN_PMC6, r9
+ ld r3, HSTATE_MMCR0(r13)
+ ld r4, HSTATE_MMCR1(r13)
+ ld r5, HSTATE_MMCRA(r13)
+ ld r6, HSTATE_SIAR(r13)
+ ld r7, HSTATE_SDAR(r13)
+ mtspr SPRN_MMCR1, r4
+ mtspr SPRN_MMCRA, r5
+ mtspr SPRN_SIAR, r6
+ mtspr SPRN_SDAR, r7
+BEGIN_FTR_SECTION
+ ld r8, HSTATE_MMCR2(r13)
+ ld r9, HSTATE_SIER(r13)
+ mtspr SPRN_MMCR2, r8
+ mtspr SPRN_SIER, r9
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ mtspr SPRN_MMCR0, r3
+ isync
+ mtlr r0
+23: blr
+
+/*
+ * Save guest PMU state into the vcpu struct.
+ * r3 = vcpu, r4 = full save flag (PMU in use flag set in VPA)
+ */
+_GLOBAL(kvmhv_save_guest_pmu)
+EXPORT_SYMBOL_GPL(kvmhv_save_guest_pmu)
+ mr r9, r3
+ mr r8, r4
+BEGIN_FTR_SECTION
+ /*
+ * POWER8 seems to have a hardware bug where setting
+ * MMCR0[PMAE] along with MMCR0[PMC1CE] and/or MMCR0[PMCjCE]
+ * when some counters are already negative doesn't seem
+ * to cause a performance monitor alert (and hence interrupt).
+ * The effect of this is that when saving the PMU state,
+ * if there is no PMU alert pending when we read MMCR0
+ * before freezing the counters, but one becomes pending
+ * before we read the counters, we lose it.
+ * To work around this, we need a way to freeze the counters
+ * before reading MMCR0. Normally, freezing the counters
+ * is done by writing MMCR0 (to set MMCR0[FC]) which
+ * unavoidably writes MMCR0[PMA0] as well. On POWER8,
+ * we can also freeze the counters using MMCR2, by writing
+ * 1s to all the counter freeze condition bits (there are
+ * 9 bits each for 6 counters).
+ */
+ li r3, -1 /* set all freeze bits */
+ clrrdi r3, r3, 10
+ mfspr r10, SPRN_MMCR2
+ mtspr SPRN_MMCR2, r3
+ isync
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ li r3, 1
+ sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
+ mfspr r4, SPRN_MMCR0 /* save MMCR0 */
+ mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */
+ mfspr r6, SPRN_MMCRA
+ /* Clear MMCRA in order to disable SDAR updates */
+ li r7, 0
+ mtspr SPRN_MMCRA, r7
+ isync
+ cmpwi r8, 0 /* did they ask for PMU stuff to be
saved? */
+ bne 21f
+ std r3, VCPU_MMCR(r9) /* if not, set saved MMCR0 to FC */
+ b 22f
+21: mfspr r5, SPRN_MMCR1
+ mfspr r7, SPRN_SIAR
+ mfspr r8, SPRN_SDAR
+ std r4, VCPU_MMCR(r9)
+ std r5, VCPU_MMCR + 8(r9)
+ std r6, VCPU_MMCR + 16(r9)
+BEGIN_FTR_SECTION
+ std r10, VCPU_MMCR + 24(r9)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ std r7, VCPU_SIAR(r9)
+ std r8, VCPU_SDAR(r9)
+ mfspr r3, SPRN_PMC1
+ mfspr r4, SPRN_PMC2
+ mfspr r5, SPRN_PMC3
+ mfspr r6, SPRN_PMC4
+ mfspr r7, SPRN_PMC5
+ mfspr r8, SPRN_PMC6
+ stw r3, VCPU_PMC(r9)
+ stw r4, VCPU_PMC + 4(r9)
+ stw r5, VCPU_PMC + 8(r9)
+ stw r6, VCPU_PMC + 12(r9)
+ stw r7, VCPU_PMC + 16(r9)
+ stw r8, VCPU_PMC + 20(r9)
+BEGIN_FTR_SECTION
+ mfspr r5, SPRN_SIER
+ std r5, VCPU_SIER(r9)
+BEGIN_FTR_SECTION_NESTED(96)
+ mfspr r6, SPRN_SPMC1
+ mfspr r7, SPRN_SPMC2
+ mfspr r8, SPRN_MMCRS
+ stw r6, VCPU_PMC + 24(r9)
+ stw r7, VCPU_PMC + 28(r9)
+ std r8, VCPU_MMCR + 32(r9)
+ lis r4, 0x8000
+ mtspr SPRN_MMCRS, r4
+END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+22: blr
+
+/*
* This works around a hardware bug on POWER8E processors, where
* writing a 1 to the MMCR0[PMAO] bit doesn't generate a
* performance monitor interrupt. Instead, when we need to have
