Use the generic pci_enable_resources() instead of the arch-specific code.
Unlike this arch-specific code, the generic version:
- checks PCI_NUM_RESOURCES (11), not 6, resources
- skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
- skips ROM resources unless IORESOURCE_ROM_ENABLE is set
- checks for resource collisions with "!r->parent"
Signed-off-by: Bjorn Helgaas <[EMAIL PROTECTED]>
Index: work8/arch/arm/kernel/bios32.c
===================================================================
--- work8.orig/arch/arm/kernel/bios32.c 2008-03-04 09:59:24.000000000 -0700
+++ work8/arch/arm/kernel/bios32.c 2008-03-04 10:01:40.000000000 -0700
@@ -660,28 +660,15 @@
*/
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
+ int err;
u16 cmd, old_cmd;
- int idx;
- struct resource *r;
+
+ err = pci_enable_resources(dev, mask);
+ if (err < 0)
+ return err;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = dev->resource + idx;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because"
- " of resource collisions\n", pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
/*
* Bridges (eg, cardbus bridges) need to be fully enabled
@@ -690,8 +677,8 @@
cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
- printk("PCI: enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
+ dev_info(&dev->dev, "enabling bridge device (%04x -> %04x)\n",
+ old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
--
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev