Use the generic pci_enable_resources() instead of the arch-specific code.
Unlike this arch-specific code, the generic version:
- checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
- skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
- skips ROM resources unless IORESOURCE_ROM_ENABLE is set
- checks for resource collisions with "!r->parent"
Signed-off-by: Bjorn Helgaas <[EMAIL PROTECTED]>
Index: work8/arch/parisc/kernel/pci.c
===================================================================
--- work8.orig/arch/parisc/kernel/pci.c 2008-03-04 10:06:11.000000000 -0700
+++ work8/arch/parisc/kernel/pci.c 2008-03-04 10:07:54.000000000 -0700
@@ -287,23 +287,15 @@
*/
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
- u16 cmd;
- int idx;
+ int err;
+ u16 cmd, old_cmd;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
- for (idx = 0; idx < DEVICE_COUNT_RESOURCE; idx++) {
- struct resource *r = &dev->resource[idx];
+ err = pci_enable_resources(dev, mask);
+ if (err < 0)
+ return err;
- /* only setup requested resources */
- if (!(mask & (1<<idx)))
- continue;
-
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
cmd |= (PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
@@ -312,8 +304,12 @@
if (dev->bus->bridge_ctl & PCI_BRIDGE_CTL_FAST_BACK)
cmd |= PCI_COMMAND_FAST_BACK;
#endif
- DBGC("PCIBIOS: Enabling device %s cmd 0x%04x\n", pci_name(dev), cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ if (cmd != old_cmd) {
+ dev_info(&dev->dev, "enabling SERR and PARITY (%04x -> %04x)\n",
+ old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
return 0;
}
--
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev