Add platform code to support Freescale DIU. The platform code includes
framebuffer memory allocation, pixel format, monitor port, etc.
Signed-off-by: York Sun <[EMAIL PROTECTED]>
---
This patch is targeting 2.6.26 kernel.
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 182 +++++++++++++++++++++++++++-
arch/powerpc/sysdev/fsl_soc.c | 41 ++++++
arch/powerpc/sysdev/fsl_soc.h | 22 ++++
3 files changed, 243 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 0b07485..e087aa3 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -3,6 +3,7 @@
*
* Initial author: Xianghua Xiao <[EMAIL PROTECTED]>
* Recode: Jason Jin <[EMAIL PROTECTED]>
+ * York Sun <[EMAIL PROTECTED]>
*
* Rewrite the interrupt routing. remove the 8259PIC support,
* All the integrated device in ULI use sideband interrupt.
@@ -38,6 +39,8 @@
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+static unsigned char *pixis_bdcfg0, *pixis_arch;
+
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
{}
@@ -161,12 +164,160 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229,
quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
#endif /* CONFIG_PCI */
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+static u32 get_busfreq(void)
+{
+ struct device_node *node;
+
+ u32 fs_busfreq = 0;
+ node = of_find_node_by_type(NULL, "cpu");
+ if (node) {
+ unsigned int size;
+ const unsigned int *prop =
+ of_get_property(node, "bus-frequency", &size);
+ if (prop)
+ fs_busfreq = *prop;
+ of_node_put(node);
+ };
+ return fs_busfreq;
+}
+
+unsigned int mpc8610hpcd_get_pixel_format
+ (unsigned int bits_per_pixel, int monitor_port)
+{
+ static const unsigned long pixelformat[][3] = {
+ {0x88882317, 0x88083218, 0x65052119},
+ {0x88883316, 0x88082219, 0x65053118},
+ };
+ unsigned int pix_fmt, arch_monitor;
+
+ arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
+ /* DVI port for board version 0x01 */
+
+ if (bits_per_pixel == 32)
+ pix_fmt = pixelformat[arch_monitor][0];
+ else if (bits_per_pixel == 24)
+ pix_fmt = pixelformat[arch_monitor][1];
+ else if (bits_per_pixel == 16)
+ pix_fmt = pixelformat[arch_monitor][2];
+ else
+ pix_fmt = pixelformat[1][0];
+
+ return pix_fmt;
+}
+
+void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
+{
+ int i;
+ if (monitor_port == 2) { /* dual link LVDS */
+ for (i = 0; i < 256*3; i++)
+ gamma_table_base[i] = (gamma_table_base[i] << 2) |
+ ((gamma_table_base[i] >> 6) & 0x03);
+ }
+}
+
+void mpc8610hpcd_set_monitor_port(int monitor_port)
+{
+ static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5};
+ if (monitor_port < 3)
+ *pixis_bdcfg0 = bdcfg[monitor_port];
+}
+
+void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
+{
+ u32 __iomem *clkdvdr;
+ u32 temp;
+ /* variables for pixel clock calcs */
+ ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock;
+ ulong pixval;
+ long err;
+ int i;
+
+ clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32));
+ if (!clkdvdr) {
+ printk(KERN_ERR "Err: can't map clock divider register!\n");
+ return;
+ }
+
+ /* Pixel Clock configuration */
+ pr_debug("DIU: Bus Frequency = %d\n", get_busfreq());
+ speed_ccb = get_busfreq();
+
+ /* Calculate the pixel clock with the smallest error */
+ /* calculate the following in steps to avoid overflow */
+ pr_debug("DIU pixclock in ps - %d\n", pixclock);
+ temp = 1000000000/pixclock;
+ temp *= 1000;
+ pixclock = temp;
+ pr_debug("DIU pixclock freq - %u\n", pixclock);
+
+ temp = pixclock * 5 / 100;
+ pr_debug("deviation = %d\n", temp);
+ minpixclock = pixclock - temp;
+ maxpixclock = pixclock + temp;
+ pr_debug("DIU minpixclock - %lu\n", minpixclock);
+ pr_debug("DIU maxpixclock - %lu\n", maxpixclock);
+ pixval = speed_ccb/pixclock;
+ pr_debug("DIU pixval = %lu\n", pixval);
+
+ err = 100000000;
+ bestval = pixval;
+ pr_debug("DIU bestval = %lu\n", bestval);
+
+ bestfreq = 0;
+ for (i = -1; i <= 1; i++) {
+ temp = speed_ccb / ((pixval+i) + 1);
+ pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n",
+ i, pixval, temp);
+ if ((temp < minpixclock) || (temp > maxpixclock))
+ pr_debug("DIU exceeds monitor range (%lu to %lu)\n",
+ minpixclock, maxpixclock);
+ else if (abs(temp - pixclock) < err) {
+ pr_debug("Entered the else if block %d\n", i);
+ err = abs(temp - pixclock);
+ bestval = pixval+i;
+ bestfreq = temp;
+ }
+ }
+
+ pr_debug("DIU chose = %lx\n", bestval);
+ pr_debug("DIU error = %ld\n NomPixClk ", err);
+ pr_debug("DIU: Best Freq = %lx\n", bestfreq);
+ /* Modify PXCLK in GUTS CLKDVDR */
+ pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr));
+ temp = (*clkdvdr) & 0x2000FFFF;
+ *clkdvdr = temp; /* turn off clock */
+ *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16);
+ pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr));
+ iounmap(clkdvdr);
+}
+
+ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE,
+ "%c0 - DVI\n"
+ "%c1 - Single link LVDS\n"
+ "%c2 - Dual link LVDS\n",
+ monitor_port == 0 ? '*' : ' ',
+ monitor_port == 1 ? '*' : ' ',
+ monitor_port == 2 ? '*' : ' ');
+}
+
+int mpc8610hpcd_set_sysfs_monitor_port(int val)
+{
+ return val < 3 ? val : 0;
+}
+
+#endif
+
+int __init preallocate_diu_videomemory(void);
static void __init
mpc86xx_hpcd_setup_arch(void)
{
-#ifdef CONFIG_PCI
+ struct resource r;
struct device_node *np;
-#endif
+
if (ppc_md.progress)
ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
@@ -183,6 +334,33 @@ mpc86xx_hpcd_setup_arch(void)
}
}
#endif
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+ preallocate_diu_videomemory();
+ diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format;
+ diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
+ diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port;
+ diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock;
+ diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port;
+ diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
+#endif
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+ if (np) {
+ of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ pixis_bdcfg0 = ioremap(r.start + 0x00000008, sizeof(u8));
+ if (!pixis_bdcfg0) {
+ printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
+ return;
+ }
+ pixis_arch = ioremap(r.start + 0x00000001, sizeof(u8));
+ if (!pixis_arch) {
+ printk(KERN_ERR "Err: can't map FPGA arch register!\n");
+ return;
+ }
+ } else
+ printk(KERN_ERR "Err: "
+ "can't find device node 'fsl,fpga-pixis'\n");
printk("MPC86xx HPCD board from Freescale Semiconductor\n");
}
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 2c5388c..38a52c9 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1438,3 +1438,44 @@ void fsl_rstcr_restart(char *cmd)
while (1) ;
}
#endif
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+struct platform_diu_data_ops diu_ops = {
+ .diu_size = 1280 * 1024 * 4, /* default one 1280x1024 buffer */
+};
+EXPORT_SYMBOL(diu_ops);
+
+int __init preallocate_diu_videomemory(void)
+{
+ pr_debug("diu_size=%lu\n", diu_ops.diu_size);
+
+ diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0);
+ if (!diu_ops.diu_mem) {
+ printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n",
+ diu_ops.diu_size);
+ return -ENOMEM;
+ }
+
+ printk(KERN_INFO "%s: diu_mem=%p\n", __func__, diu_ops.diu_mem);
+
+ rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block),
+ diu_ops.diu_rh_block);
+ return rh_attach_region(&diu_ops.diu_rh_info,
+ (unsigned long) diu_ops.diu_mem,
+ diu_ops.diu_size);
+}
+
+static int __init early_parse_diufb(char *p)
+{
+ if (!p)
+ return 1;
+
+ diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8);
+
+ printk(KERN_INFO "%s: diu_size=%lu\n", __func__, diu_ops.diu_size);
+
+ return 0;
+}
+early_param("diufb", early_parse_diufb);
+
+#endif
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 63e7db3..5601be1 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -16,5 +16,27 @@ extern int fsl_spi_init(struct spi_board_info *board_infos,
void (*deactivate_cs)(u8 cs, u8 polarity));
extern void fsl_rstcr_restart(char *cmd);
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+#include <linux/bootmem.h>
+#include <asm/rheap.h>
+struct platform_diu_data_ops {
+ rh_block_t diu_rh_block[16];
+ rh_info_t diu_rh_info;
+ unsigned long diu_size;
+ void *diu_mem;
+
+ unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
+ int monitor_port);
+ void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
+ void (*set_monitor_port) (int monitor_port);
+ void (*set_pixel_clock) (unsigned int pixclock);
+ ssize_t (*show_monitor_port) (int monitor_port, char *buf);
+ int (*set_sysfs_monitor_port) (int val);
+};
+
+extern struct platform_diu_data_ops diu_ops;
+#endif
+
#endif
#endif
--
1.5.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
