David Gibson schrieb:
On Thu, Mar 20, 2008 at 08:48:42AM +0100, André Schwarz wrote:
David Gibson schrieb:
On Thu, Mar 20, 2008 at 01:14:45AM +0100, Wolfgang Denk wrote:
In message <[EMAIL PROTECTED]> you wrote:
I've pulled the latest git and built a mpc5200_simple system with a
minimal dts.
There's not a single char put on the console ....
You did build your device tree with "-b 0", didn't you?
Ugh.. I really need to fix dtc to pick the default boot cpu value more
sensibly, don't I.
I didn't specify "-b 0". This shouldn't be neccessary on a single processor
system ! After all it's an option ... "0" should be default.
Should, yes. But dtc's pretty new, and a sensible default for -b is
one thing that isn't there.
ok - but this has not caused my (solved) problem. dtc is working fine
for me :-)
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht:
Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
