Hello,
I noticed that on my 405EP board (made in-house), the PCI Arbiter bit
is not set
in the CPC0_PCI register even though CPC0_PCI[PAE] bit 5 is set in the
serial EEPROM.
Other registers (PLL,...) bits are set correctly and got their value
from the IIC.
I check the value of I2C and CPC0_PCI[PAE] bits under U-boot and nothing
in the code
seems to clear this register bit(CPC0_PCI[PAE]).
Is there any errata regarding these CPU I have missed or should I keep
investigating
the hardware side?
thanks.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
