Why not a compatible field in the top of the tree? Then you wouldn't need to list the boards in mpc5200_simple.c. compatible = "phytec,pcm030","simple-mpc5200";
Device tree has an entry for AC97 on PSC1. I don't think the Phytec module or carrier board has AC97 hardware. The RTC chip says pcf8563, phytec doc says it is a pcf8564. There should be an i2c entry for the eeprom but I don't know the part number for it. What about the flash on the local bus? Could we use something like this, or the same without the partition data? [EMAIL PROTECTED] { compatible = "fsl,lpb"; ranges = <0 ff000000 01000000>; [EMAIL PROTECTED] { compatible = "cfi-flash"; reg = <00000000 01000000>; bank-width = <2>; #size-cells = <1>; #address-cells = <1>; [EMAIL PROTECTED] { label = "ubootl"; reg = <00000000 00040000>; }; [EMAIL PROTECTED] { label = "kernel"; reg = <00040000 001c0000>; }; [EMAIL PROTECTED] { label = "jffs2"; reg = <00200000 00D00000>; }; [EMAIL PROTECTED] { label = "uboot"; reg = <00f00000 00040000>; }; [EMAIL PROTECTED] { label = "oftree"; reg = <00f40000 00040000>; }; [EMAIL PROTECTED] { label = "space"; reg = <00f80000 00080000>; }; }; }; -- Jon Smirl [EMAIL PROTECTED] _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev