On Tue, 15 Mar 2022 22:58:57 +0100 Paul Menzel wrote: > On the POWER8 server IBM S822LC (ppc64le), I am unable to set the > message level for the network device to 0x0100000 but it fails. > > $ sudo ethtool -s enP1p1s0f2 msglvl 0x0100000 > netlink error: cannot modify bits past kernel bitset size (offset 56) > netlink error: Invalid argument > > Below is more information. 0x7fff is the largest value I am able to set. > > ``` > $ sudo ethtool -i enP1p1s0f2 > driver: bnx2x > version: 5.17.0-rc7+ > firmware-version: bc 7.10.4 > expansion-rom-version: > bus-info: 0001:01:00.2 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: yes > supports-register-dump: yes > supports-priv-flags: yes > $ sudo ethtool -s enP1p1s0f2 msglvl 0x7fff > $ sudo ethtool enP1p1s0f2 > Settings for enP1p1s0f2: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Full > Supported pause frame use: Symmetric Receive-only > Supports auto-negotiation: Yes > Supported FEC modes: Not reported > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Full > Advertised pause frame use: Symmetric Receive-only > Advertised auto-negotiation: Yes > Advertised FEC modes: Not reported > Speed: Unknown! > Duplex: Unknown! (255) > Auto-negotiation: on > Port: Twisted Pair > PHYAD: 17 > Transceiver: internal > MDI-X: Unknown > Supports Wake-on: g > Wake-on: d > Current message level: 0x00007fff (32767) > drv probe link timer ifdown ifup rx_err > tx_err tx_queued intr tx_done rx_status pktdata hw wol > Link detected: no > $ sudo ethtool -s enP1p1s0f2 msglvl 0x8000 > netlink error: cannot modify bits past kernel bitset size (offset 56) > netlink error: Invalid argument > ```
The new ethtool-over-netlink API limits the msg levels to the ones officially defined by the kernel (NETIF_MSG_CLASS_COUNT). CC: Michal
