There aren't enough resources to run these ports at 10G speeds. Disable
10G for these ports, reverting to the previous speed.
Fixes: 36926a7d70c2 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza <[email protected]>
Signed-off-by: Sean Anderson <[email protected]>
---
Changes in v2:
- Remove the 10g properties, instead of removing the MAC dtsis.
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 74e17e134387..27714dc2f04a 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -659,3 +659,19 @@ L2_1: l2-cache-controller@c20000 {
interrupts = <16 2 1 9>;
};
};
+
+&fman0_rx_0x08 {
+ /delete-property/ fsl,fman-10g-port;
+};
+
+&fman0_tx_0x28 {
+ /delete-property/ fsl,fman-10g-port;
+};
+
+&fman0_rx_0x09 {
+ /delete-property/ fsl,fman-10g-port;
+};
+
+&fman0_tx_0x29 {
+ /delete-property/ fsl,fman-10g-port;
+};
--
2.35.1.1320.gc452695387.dirty