We extend the existing RISC-V SBI earlycon support to use the new
RISC-V SBI debug console extension.

Signed-off-by: Anup Patel <apa...@ventanamicro.com>
---
 drivers/tty/serial/Kconfig              |  2 +-
 drivers/tty/serial/earlycon-riscv-sbi.c | 32 +++++++++++++++++++++----
 2 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index bdc568a4ab66..cec46091a716 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -87,7 +87,7 @@ config SERIAL_EARLYCON_SEMIHOST
 
 config SERIAL_EARLYCON_RISCV_SBI
        bool "Early console using RISC-V SBI"
-       depends on RISCV_SBI_V01
+       depends on RISCV_SBI
        select SERIAL_CORE
        select SERIAL_CORE_CONSOLE
        select SERIAL_EARLYCON
diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c 
b/drivers/tty/serial/earlycon-riscv-sbi.c
index 27afb0b74ea7..c21cdef254e7 100644
--- a/drivers/tty/serial/earlycon-riscv-sbi.c
+++ b/drivers/tty/serial/earlycon-riscv-sbi.c
@@ -15,17 +15,41 @@ static void sbi_putc(struct uart_port *port, unsigned char 
c)
        sbi_console_putchar(c);
 }
 
-static void sbi_console_write(struct console *con,
-                             const char *s, unsigned n)
+static void sbi_0_1_console_write(struct console *con,
+                                 const char *s, unsigned int n)
 {
        struct earlycon_device *dev = con->data;
        uart_console_write(&dev->port, s, n, sbi_putc);
 }
 
+static void sbi_dbcn_console_write(struct console *con,
+                                  const char *s, unsigned int n)
+{
+       phys_addr_t pa = __pa(s);
+
+       if (IS_ENABLED(CONFIG_32BIT))
+               sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+                         n, lower_32_bits(pa), upper_32_bits(pa), 0, 0, 0);
+       else
+               sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+                         n, pa, 0, 0, 0, 0);
+}
+
 static int __init early_sbi_setup(struct earlycon_device *device,
                                  const char *opt)
 {
-       device->con->write = sbi_console_write;
-       return 0;
+       int ret = 0;
+
+       if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
+           (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+               device->con->write = sbi_dbcn_console_write;
+       } else {
+               if (IS_ENABLED(CONFIG_RISCV_SBI_V01))
+                       device->con->write = sbi_0_1_console_write;
+               else
+                       ret = -ENODEV;
+       }
+
+       return ret;
 }
 EARLYCON_DECLARE(sbi, early_sbi_setup);
-- 
2.34.1

Reply via email to