[EMAIL PROTECTED] wrote:
Hi,
I have the following problem, when i am trying to boot linux on
MPC8360E MDS board with the mpc836x_mds.dtb created using dtc and
mpc836x_mds.dts in from /arch/powerpc/boot/platforms/dts/ directory of
linux-2.6.22 version.
fdt_chosen: FDT_ERR_BADMAGIC
after this it is trying to re boot.
how to resolve this issue, so i need to apply any pathces to
mpc836x_mds.dts file.
NOTE: i am using dtc compiled from linux-2.6.26 version.
Regards
Surendra
Hi Surendra,
Is the error message coming from u-boot or linux? More lines from the
boot sequence (like most or all of them) would be useful.
The error message is saying that whatever you are passing to the kernel
(or setting in u-boot with "fdt addr") for your dtb blob is not a valid
dtb blob. Display memory where you think your blob resides: if it
doesn't have 0xd00dfeed in that location, it isn't a valid binary blob.
I suspect you will find either you didn't compile your .dts file
correctly or your blob address is wrong.
If you gave us your dtc command line, that might be helpful.
HTH,
gvb
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
