Many simple GPIO controllers without interrupt capability have the same schema other than their compatible value. Combine all these bindings into a single schema. The criteria to be included here is must use 2 cells, have no interrupt capability, have 0 or 1 "reg" entries, and have no other resources (like clocks).
Note that "ngpios" is now allowed in some cases it wasn't before and constraints on it have been dropped. Signed-off-by: Rob Herring (Arm) <r...@kernel.org> --- We could also do this for ones with interrupts, but that seems a bit more varied. v2: - Add Cirrus EP7209 - Update references and MAINTAINERS --- .../devicetree/bindings/gpio/fcs,fxl6408.yaml | 59 ---------- .../bindings/gpio/gateworks,pld-gpio.txt | 19 --- .../bindings/gpio/gpio-clps711x.txt | 28 ----- .../devicetree/bindings/gpio/gpio-lp3943.txt | 37 ------ .../bindings/gpio/gpio-max77620.txt | 25 ---- .../devicetree/bindings/gpio/gpio-moxtet.txt | 18 --- .../devicetree/bindings/gpio/gpio-palmas.txt | 27 ----- .../bindings/gpio/gpio-pca9570.yaml | 56 --------- .../bindings/gpio/gpio-tpic2810.yaml | 51 -------- .../devicetree/bindings/gpio/gpio-ts4800.txt | 20 ---- .../devicetree/bindings/gpio/gpio-ts4900.txt | 30 ----- .../devicetree/bindings/gpio/gpio-xgene.txt | 22 ---- .../bindings/gpio/ibm,ppc4xx-gpio.txt | 24 ---- .../bindings/gpio/loongson,ls1x-gpio.yaml | 49 -------- .../bindings/gpio/nintendo,hollywood-gpio.txt | 26 ----- .../gpio/rockchip,rk3328-grf-gpio.yaml | 50 -------- .../bindings/gpio/snps,creg-gpio.txt | 21 ---- .../devicetree/bindings/gpio/ti,7416374.yaml | 56 --------- .../bindings/gpio/trivial-gpio.yaml | 110 ++++++++++++++++++ .../devicetree/bindings/mfd/lp3943.txt | 2 +- .../bindings/powerpc/nintendo/wii.txt | 4 - .../devicetree/bindings/soc/rockchip/grf.yaml | 8 +- MAINTAINERS | 3 - 23 files changed, 116 insertions(+), 629 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-clps711x.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-moxtet.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-palmas.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-ts4800.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-ts4900.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-xgene.txt delete mode 100644 Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt delete mode 100644 Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt delete mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt delete mode 100644 Documentation/devicetree/bindings/gpio/ti,7416374.yaml create mode 100644 Documentation/devicetree/bindings/gpio/trivial-gpio.yaml diff --git a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml deleted file mode 100644 index b74fa81e7d05..000000000000 --- a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml +++ /dev/null @@ -1,59 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/fcs,fxl6408.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Fairchild FXL6408 I2C GPIO Expander - -maintainers: - - Emanuele Ghidoli <emanuele.ghid...@toradex.com> - -properties: - compatible: - enum: - - fcs,fxl6408 - - reg: - maxItems: 1 - - "#gpio-cells": - const: 2 - - gpio-controller: true - - gpio-line-names: - minItems: 1 - maxItems: 8 - -patternProperties: - "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": - type: object - required: - - gpio-hog - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - gpio_expander_43: gpio-expander@43 { - compatible = "fcs,fxl6408"; - reg = <0x43>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "Wi-Fi_W_DISABLE", "Wi-Fi_WKUP_WLAN", - "PWR_EN_+V3.3_WiFi_N", "PCIe_REF_CLK_EN", - "USB_RESET_N", "USB_BYPASS_N", "Wi-Fi_PDn", - "Wi-Fi_WKUP_BT"; - }; - }; diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt deleted file mode 100644 index d543fd1b8b23..000000000000 --- a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt +++ /dev/null @@ -1,19 +0,0 @@ -Gateworks PLD GPIO controller bindings - -The GPIO controller should be a child node on an I2C bus. - -Required properties: -- compatible: Should be "gateworks,pld-gpio" -- reg: I2C slave address -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be <2>. The first cell is the gpio number and - the second cell is used to specify optional parameters. - -Example: - -pld@56 { - compatible = "gateworks,pld-gpio"; - reg = <0x56>; - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt deleted file mode 100644 index 0a304ad29d81..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt +++ /dev/null @@ -1,28 +0,0 @@ -Cirrus Logic CLPS711X GPIO controller - -Required properties: -- compatible: Should be "cirrus,ep7209-gpio" -- reg: Physical base GPIO controller registers location and length. - There should be two registers, first is DATA register, the second - is DIRECTION. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Note: Each GPIO port should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - gpio0 = &porta; -}; - -porta: gpio@80000000 { - compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio"; - reg = <0x80000000 0x1>, <0x80000040 0x1>; - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt deleted file mode 100644 index 80fcb7d70e13..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt +++ /dev/null @@ -1,37 +0,0 @@ -TI/National Semiconductor LP3943 GPIO controller - -Required properties: - - compatible: "ti,lp3943-gpio" - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be 2. See gpio.txt in this directory for a - description of the cells format. - -Example: -Simple LED controls with LP3943 GPIO controller - -&i2c4 { - lp3943@60 { - compatible = "ti,lp3943"; - reg = <0x60>; - - gpioex: gpio { - compatible = "ti,lp3943-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - }; -}; - -leds { - compatible = "gpio-leds"; - indicator1 { - label = "indi1"; - gpios = <&gpioex 9 GPIO_ACTIVE_LOW>; - }; - - indicator2 { - label = "indi2"; - gpios = <&gpioex 10 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt deleted file mode 100644 index 410e716fd3d2..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt +++ /dev/null @@ -1,25 +0,0 @@ -GPIO driver for MAX77620 Power management IC from Maxim Semiconductor. - -Device has 8 GPIO pins which can be configured as GPIO as well as the -special IO functions. - -Required properties: -------------------- -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -For more details, please refer generic GPIO DT binding document -<devicetree/bindings/gpio/gpio.txt>. - -Example: --------- -#include <dt-bindings/mfd/max77620.h> -... -max77620@3c { - compatible = "maxim,max77620"; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt deleted file mode 100644 index 410759de9f09..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt +++ /dev/null @@ -1,18 +0,0 @@ -Turris Mox Moxtet GPIO expander via Moxtet bus - -Required properties: - - compatible : Should be "cznic,moxtet-gpio". - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Other properties are required for a Moxtet bus device, please refer to -Documentation/devicetree/bindings/bus/moxtet.txt. - -Example: - - moxtet_sfp: gpio@0 { - compatible = "cznic,moxtet-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0>; - } diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt deleted file mode 100644 index 08b5b52a3ae0..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt +++ /dev/null @@ -1,27 +0,0 @@ -Palmas GPIO controller bindings - -Required properties: -- compatible: - - "ti,palams-gpio" for palma series of the GPIO controller - - "ti,tps80036-gpio" for Palma series device TPS80036. - - "ti,tps65913-gpio" for palma series device TPS65913. - - "ti,tps65914-gpio" for palma series device TPS65914. -- #gpio-cells : Should be two. - - first cell is the gpio pin number - - second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- gpio-controller : Marks the device node as a GPIO controller. - -Note: This gpio node will be sub node of palmas node. - -Example: - palmas: tps65913@58 { - ::::::::::: - palmas_gpio: palmas_gpio { - compatible = "ti,palmas-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - ::::::::::: - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml deleted file mode 100644 index 6f73961001b7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ /dev/null @@ -1,56 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: PCA9570 I2C GPO expander - -maintainers: - - Sungbo Eo <man...@gorani.run> - -properties: - compatible: - enum: - - dlg,slg7xl45106 - - nxp,pca9570 - - nxp,pca9571 - - reg: - maxItems: 1 - - gpio-controller: true - - '#gpio-cells': - const: 2 - - gpio-line-names: - minItems: 4 - maxItems: 8 - - label: - description: A descriptive name for this device. - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - gpio@24 { - compatible = "nxp,pca9570"; - reg = <0x24>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml deleted file mode 100644 index 157969bc4c46..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml +++ /dev/null @@ -1,51 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: TPIC2810 GPIO controller - -maintainers: - - Aswath Govindraju <a-govindr...@ti.com> - -properties: - compatible: - enum: - - ti,tpic2810 - - reg: - maxItems: 1 - - gpio-controller: true - - "#gpio-cells": - const: 2 - - gpio-line-names: - minItems: 1 - maxItems: 32 - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - #include <dt-bindings/gpio/gpio.h> - - i2c { - #address-cells = <1>; - #size-cells = <0>; - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "LED A", "LED B", "LED C"; - }; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt deleted file mode 100644 index 92ea9c8f6399..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt +++ /dev/null @@ -1,20 +0,0 @@ -* TS-4800 FPGA's GPIO controller bindings - -Required properties: -- compatible: Must be "technologic,ts4800-gpio". -- #gpio-cells: Should be two. The first cell is the pin number. -- reg: Physical base address of the controller and length - of memory mapped region. - -Optional property: -- ngpios: See "gpio.txt" - -Example: - -gpio1: gpio { - compatible = "technologic,ts4800-gpio"; - reg = <0x10020 0x6>; - ngpios = <8>; - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt deleted file mode 100644 index 3f8e71b1ab2a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Technologic Systems I2C-FPGA's GPIO controller bindings - -This bindings describes the GPIO controller for Technologic's FPGA core. -TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA -uses 2 bits: it doesn't use a dedicated input bit. - -Required properties: -- compatible: Should be one of the following - "technologic,ts4900-gpio" - "technologic,ts7970-gpio" -- reg: Physical base address of the controller and length - of memory mapped region. -- #gpio-cells: Should be two. The first cell is the pin number. -- gpio-controller: Marks the device node as a gpio controller. - -Optional property: -- ngpios: Number of GPIOs this controller is instantiated with, - the default is 32. See gpio.txt for more details. - -Example: - -&i2c2 { - gpio8: gpio@28 { - compatible = "technologic,ts4900-gpio"; - reg = <0x28>; - #gpio-cells = <2>; - gpio-controller; - ngpios = <32>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt deleted file mode 100644 index 86dbb05e7758..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt +++ /dev/null @@ -1,22 +0,0 @@ -APM X-Gene SoC GPIO controller bindings - -This is a gpio controller that is part of the flash controller. -This gpio controller controls a total of 48 gpios. - -Required properties: -- compatible: "apm,xgene-gpio" for X-Gene GPIO controller -- reg: Physical base address and size of the controller's registers -- #gpio-cells: Should be two. - - first cell is the pin number - - second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- gpio-controller: Marks the device node as a GPIO controller. - -Example: - gpio0: gpio0@1701c000 { - compatible = "apm,xgene-gpio"; - reg = <0x0 0x1701c000 0x0 0x40>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt deleted file mode 100644 index d58b3958f3ea..000000000000 --- a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt +++ /dev/null @@ -1,24 +0,0 @@ -* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs - -All GPIOs are pin-shared with other functions. DCRs control whether a -particular pin that has GPIO capabilities acts as a GPIO or is used for -another purpose. GPIO outputs are separately programmable to emulate -an open-drain driver. - -Required properties: - - compatible: must be "ibm,ppc4xx-gpio" - - reg: address and length of the register set for the device - - #gpio-cells: must be set to 2. The first cell is the pin number - and the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: marks the device node as a gpio controller. - -Example: - -GPIO0: gpio@ef600b00 { - compatible = "ibm,ppc4xx-gpio"; - reg = <0xef600b00 0x00000048>; - #gpio-cells = <2>; - gpio-controller; -}; diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml deleted file mode 100644 index 1a472c05697c..000000000000 --- a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/loongson,ls1x-gpio.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Loongson-1 GPIO controller - -maintainers: - - Keguang Zhang <keguang.zh...@gmail.com> - -properties: - compatible: - const: loongson,ls1x-gpio - - reg: - maxItems: 1 - - gpio-controller: true - - "#gpio-cells": - const: 2 - - ngpios: - minimum: 1 - maximum: 32 - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - - ngpios - -additionalProperties: false - -examples: - - | - gpio0: gpio@1fd010c0 { - compatible = "loongson,ls1x-gpio"; - reg = <0x1fd010c0 0x4>; - - gpio-controller; - #gpio-cells = <2>; - - ngpios = <32>; - }; - -... diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt deleted file mode 100644 index df63da46309c..000000000000 --- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt +++ /dev/null @@ -1,26 +0,0 @@ -Nintendo Wii (Hollywood) GPIO controller - -Required properties: -- compatible: "nintendo,hollywood-gpio" -- reg: Physical base address and length of the controller's registers. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be <2>. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted). - -Optional properties: -- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- interrupts: Interrupt specifier for the controller's Broadway (PowerPC) - interrupt. - -Example: - - GPIO: gpio@d8000c0 { - #gpio-cells = <2>; - compatible = "nintendo,hollywood-gpio"; - reg = <0x0d8000c0 0x40>; - gpio-controller; - ngpios = <24>; - } diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml deleted file mode 100644 index d8cce73ea0ae..000000000000 --- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml +++ /dev/null @@ -1,50 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Rockchip RK3328 General Register Files GPIO controller - -description: - The Rockchip RK3328 General Register File (GRF) outputs only the - GPIO_MUTE pin, originally for codec mute control, but it can also be used - for general purpose. It is manipulated by the GRF_SOC_CON10 register. - If needed in the future support for the HDMI pins can also be added. - The GPIO node should be declared as the child of the GRF node. - - The GPIO_MUTE pin is referred to in the format - - <&grf_gpio 0 GPIO_ACTIVE_LOW> - - The first cell is the pin number and - the second cell is used to specify the GPIO polarity - 0 = Active high - 1 = Active low - -maintainers: - - Heiko Stuebner <he...@sntech.de> - -properties: - compatible: - const: rockchip,rk3328-grf-gpio - - gpio-controller: true - - "#gpio-cells": - const: 2 - -required: - - compatible - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - grf_gpio: gpio { - compatible = "rockchip,rk3328-grf-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt deleted file mode 100644 index 1b30812b015b..000000000000 --- a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt +++ /dev/null @@ -1,21 +0,0 @@ -Synopsys GPIO via CREG (Control REGisters) driver - -Required properties: -- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x". -- reg : Exactly one register range with length 0x4. -- #gpio-cells : Since the generic GPIO binding is used, the - amount of cells must be specified as 2. The first cell is the - pin number, the second cell is used to specify optional parameters: - See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- gpio-controller : Marks the device node as a GPIO controller. -- ngpios: Number of GPIO pins. - -Example: - -gpio: gpio@f00014b0 { - compatible = "snps,creg-gpio-hsdk"; - reg = <0xf00014b0 0x4>; - gpio-controller; - #gpio-cells = <2>; - ngpios = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/ti,7416374.yaml b/Documentation/devicetree/bindings/gpio/ti,7416374.yaml deleted file mode 100644 index 33472f091101..000000000000 --- a/Documentation/devicetree/bindings/gpio/ti,7416374.yaml +++ /dev/null @@ -1,56 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/ti,7416374.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: TI 74XX MMIO GPIO - -maintainers: - - Frank Li <frank...@nxp.com> - -properties: - compatible: - enum: - - ti,741g125 # for 741G125 (1-bit Input), - - ti,741g174 # for 741G74 (1-bit Output), - - ti,742g125 # for 742G125 (2-bit Input), - - ti,7474 # for 7474 (2-bit Output), - - ti,74125 # for 74125 (4-bit Input), - - ti,74175 # for 74175 (4-bit Output), - - ti,74365 # for 74365 (6-bit Input), - - ti,74174 # for 74174 (6-bit Output), - - ti,74244 # for 74244 (8-bit Input), - - ti,74273 # for 74273 (8-bit Output), - - ti,741624 # for 741624 (16-bit Input), - - ti,7416374 # for 7416374 (16-bit Output). - - reg: - maxItems: 1 - - gpio-controller: true - - '#gpio-cells': - const: 2 - description: | - The first cell is the pin number and - the second cell is used to specify the GPIO polarity: - 0 = Active High, - 1 = Active Low. - -required: - - compatible - - reg - - gpio-controller - - '#gpio-cells' - -additionalProperties: false - -examples: - - | - gpio@30008004 { - compatible = "ti,74174"; - reg = <0x30008004 0x1>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml new file mode 100644 index 000000000000..0299d4a25086 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/trivial-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial 2-cell GPIO controllers + +maintainers: + - Bartosz Golaszewski <b...@bgdev.pl> + +properties: + compatible: + oneOf: + - items: + - enum: + - cirrus,ep7312-gpio + - const: cirrus,ep7209-gpio + - enum: + - apm,xgene-gpio + - cirrus,ep7209-gpio + - cznic,moxtet-gpio + - dlg,slg7xl45106 + - fcs,fxl6408 + - gateworks,pld-gpio + - ibm,ppc4xx-gpio + - loongson,ls1x-gpio + - maxim,max77620 + - nintendo,hollywood-gpio + - nxp,pca9570 + - nxp,pca9571 + - rockchip,rk3328-grf-gpio + - snps,creg-gpio-hsdk + - technologic,ts4800-gpio + - technologic,ts4900-gpio + - technologic,ts7970-gpio + - ti,741g125 # for 741G125 (1-bit Input), + - ti,741g174 # for 741G74 (1-bit Output), + - ti,742g125 # for 742G125 (2-bit Input), + - ti,7474 # for 7474 (2-bit Output), + - ti,74125 # for 74125 (4-bit Input), + - ti,74175 # for 74175 (4-bit Output), + - ti,74365 # for 74365 (6-bit Input), + - ti,74174 # for 74174 (6-bit Output), + - ti,74244 # for 74244 (8-bit Input), + - ti,74273 # for 74273 (8-bit Output), + - ti,741624 # for 741624 (16-bit Input), + - ti,7416374 # for 7416374 (16-bit Output). + - ti,lp3943-gpio + - ti,palmas-gpio + - ti,tpic2810 + - ti,tps80036-gpio + - ti,tps65913-gpio + - ti,tps65914-gpio + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + gpio-line-names: true + + ngpios: true + + # Don't add more properties + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + required: + - gpio-hog + +required: + - compatible + - '#gpio-cells' + - gpio-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - maxim,max77620 + - rockchip,rk3328-grf-gpio + - ti,lp3943-gpio + - ti,palmas-gpio + - ti,tps80036-gpio + - ti,tps65913-gpio + - ti,tps65914-gpio + then: + properties: + reg: false + else: + required: + - reg + +additionalProperties: false + +examples: + - | + gpio@1701c000 { + compatible = "apm,xgene-gpio"; + reg = <0x1701c000 0x40>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt index e8591d6b11b4..ca5324ed0df4 100644 --- a/Documentation/devicetree/bindings/mfd/lp3943.txt +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -7,7 +7,7 @@ Required properties: LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. For the LP3943 GPIO properties please refer to: -Documentation/devicetree/bindings/gpio/gpio-lp3943.txt +Documentation/devicetree/bindings/gpio/trivial-gpio.yaml For the LP3943 PWM properties please refer to: Documentation/devicetree/bindings/pwm/pwm-lp3943.txt diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index 6f69a9dfe198..df060a0d7d4a 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -139,10 +139,6 @@ Nintendo Wii device tree - interrupt-controller - interrupts : should contain the cascade interrupt of the "flipper" pic -1.l) The General Purpose I/O (GPIO) controller node - - see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt - 1.m) The control node Represents the control interface used to setup several miscellaneous diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index ccdcc889ba8e..1ab0b092e2a5 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -179,10 +179,12 @@ allOf: properties: gpio: type: object + properties: + compatible: + contains: + const: rockchip,rk3328-grf-gpio - $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# - - unevaluatedProperties: false + additionalProperties: true power-controller: type: object diff --git a/MAINTAINERS b/MAINTAINERS index 35f692c81df8..099405ced395 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2574,7 +2574,6 @@ F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm F: Documentation/devicetree/bindings/bus/moxtet.txt F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml -F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt F: Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt @@ -24197,7 +24196,6 @@ F: drivers/reset/reset-axs10x.c SYNOPSYS CREG GPIO DRIVER M: Eugeniy Paltsev <eugeniy.palt...@synopsys.com> S: Maintained -F: Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt F: drivers/gpio/gpio-creg-snps.c SYNOPSYS DESIGNWARE 8250 UART DRIVER @@ -27495,7 +27493,6 @@ XRA1403 GPIO EXPANDER M: Nandor Han <nandor....@ge.com> L: linux-g...@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt F: drivers/gpio/gpio-xra1403.c XTENSA XTFPGA PLATFORM SUPPORT -- 2.47.2
