On Thu, Oct 02, 2008 at 10:27:57AM -0500, Timur Tabi wrote: > Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable > option, thereby allowing users to compile kernels without any QE support. > > The drawback is that QE support is now disabled by default on platforms that > have a QE, and so a defconfig is needed to enable QE and QE devices (like > UCC GETH). Fortunately, all the current relevant defconfigs do that already. > > Signed-off-by: Timur Tabi <[EMAIL PROTECTED]> > ---
[...] > config MPC836x_RDK > bool "Freescale/Logic MPC836x RDK" > select DEFAULT_UIMAGE > - select QUICC_ENGINE > select QE_GPIO IIRC selects do not honor any dependencies, i.e. you should delete the QE_GPIO too. > select FSL_GTM > select FSL_LBC > diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig > index 9578c45..6cf517f 100644 > --- a/arch/powerpc/platforms/Kconfig > +++ b/arch/powerpc/platforms/Kconfig > @@ -239,7 +239,8 @@ config TAU_AVERAGE > If in doubt, say N here. > > config QUICC_ENGINE > - bool > + bool "Freescale QUICC Engine (QE) Support" > + depends on FSL_SOC > select PPC_LIB_RHEAP > select CRC32 > help > -- > 1.5.5 -- Anton Vorontsov email: [EMAIL PROTECTED] irc://irc.freenode.net/bd2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev