The version on the CD does not seem to see it at all: [...] U-Boot 1.3.4-rc1-00012-g1953d12 (Jul 28 2008 - 09:09:09) MPC83XX [...] Linux version 2.6.13.4 ([EMAIL PROTECTED]) (gcc version 3.4.3) #1 Thu Oct 19 16:27:15 EDT 2006 PCI2 confirm: isa_io_base = 0xfc000000 Configure PCI2 controller isa_io_base = 0xfc000000 hose2->io_base_virt = 0xfd000000 Built 1 zonelists Kernel command line: root=/dev/ram ramdisk_size=65000 rw ip=10.100.17.83:10.100.10.74:10.100.17.1:255.255.255.0::eth0:off console=ttyS0,115200 mtdparts=physmap-flash.0:64k,8128k,- IPIC (128 IRQ sources, 8 External IRQs) at fe000700 PID hash table entries: 2048 (order: 11, 32768 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 244096k available (2432k kernel code, 884k data, 120k init, 0k highmem) Mount-cache hash table entries: 512 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 11910k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Cannot allocate resource region 0 of device 0000:00:00.0 PCI: Cannot allocate resource region 2 of device 0000:00:00.0 PCI: Cannot allocate resource region 0 of device 0001:01:00.0 PCI: Cannot allocate resource region 2 of device 0001:01:00.0 PCI: Failed to allocate mem resource #2:[EMAIL PROTECTED] for 0000:00:00.0 PCI: Failed to allocate mem resource #2:[EMAIL PROTECTED] for 0001:01:00.0 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NTFS driver 2.1.23 [Flags: R/W DEBUG]. Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0xe0004500 (irq = 9) is a 16550A ttyS1 at MMIO 0xe0004600 (irq = 10) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 65000K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.0.60-k2 Copyright (c) 1999-2005 Intel Corporation. eth0: Gianfar Ethernet Controller Version 1.1, 08:00:3e:03:01:10 eth0: Running with NAPI enabled eth0: 32/32 RX/TX BD ring size eth1: Gianfar Ethernet Controller Version 1.1, 08:00:3e:03:01:11 eth1: Running with NAPI enabled eth1: 32/32 RX/TX BD ring size sata_sil(0000:00:10.0): cache line size not set. Driver may not function ata1: SATA max UDMA/100 cmd 0xD1000C80 ctl 0xD1000C8A bmdma 0xD1000C00 irq 22 ata2: SATA max UDMA/100 cmd 0xD1000CC0 ctl 0xD1000CCA bmdma 0xD1000C08 irq 22 ata3: SATA max UDMA/100 cmd 0xD1000E80 ctl 0xD1000E8A bmdma 0xD1000E00 irq 22 ata4: SATA max UDMA/100 cmd 0xD1000EC0 ctl 0xD1000ECA bmdma 0xD1000E08 irq 22 ata1: no device found (phy stat 00000000) scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil ata3: no device found (phy stat 00000000) scsi2 : sata_sil ata4: no device found (phy stat 00000000) scsi3 : sata_sil usbmon: debugfs is not available driver fsl-usb2-mph, $Revision: 1.11 $ [...]
Will try Anton's suggestions next. -Jeff Timur Tabi-3 wrote: > > On Thu, Oct 9, 2008 at 12:00 PM, Jeff Borlin <[EMAIL PROTECTED]> > wrote: >> >> Can you point me to where that can be found? > > It's on the CD that came with the board. > > -- > Timur Tabi > Linux kernel developer at Freescale > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev > > -- View this message in context: http://www.nabble.com/Compact-Flash-on-8349mITX-tp18754330p19904213.html Sent from the linuxppc-dev mailing list archive at Nabble.com. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev