On 10/20/08, Kim Phillips <[EMAIL PROTECTED]> wrote: > On Mon, 20 Oct 2008 15:00:33 -0700 > "mike zheng" <[EMAIL PROTECTED]> wrote: > > > I have following kernel Oops when I run ifconfig to setup the UEC0 of > > MPC8360MDS board. There is no hardware problem, the UEC0 runs well > > under Uboot. > > does this occur on vanilla u-boot and kernel versions? if so, which > ones, and on what board revision? > The kernel Oops happened under Linux when I try to use "ifconfig" to setup the eth0. Under Uboot, the UEC0 works fine. I am able to do ping, tftp via the ethernet port.
> > Call backtrace: > > C0126890 C00D59D0 C00D761C C012F400 C0130DD4 C01746B4 C017712C > > C0127770 C004D8B0 C0005ABC 00000000 10001214 100023C4 0FEC4E00 > > 00000000 > > might want to turn on verbose debugging while you're at it. Which flag shall I turned on? I am not formaliar to the network driver. Thanks! > > Kim > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
