Fix typos in comments, reported by scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Only touches comments, no code changes.
Assisted-by: Cursor:claude-opus-5 Signed-off-by: Hemanth Selam <[email protected]> --- drivers/usb/atm/ueagle-atm.c | 2 +- drivers/usb/c67x00/c67x00-ll-hpi.c | 8 ++++---- drivers/usb/c67x00/c67x00-sched.c | 2 +- drivers/usb/class/cdc-wdm.c | 2 +- drivers/usb/core/hub.c | 2 +- drivers/usb/fotg210/fotg210-hcd.h | 2 +- drivers/usb/gadget/configfs.c | 2 +- drivers/usb/gadget/function/f_hid.c | 2 +- drivers/usb/gadget/function/f_uac2.c | 4 ++-- drivers/usb/gadget/legacy/inode.c | 2 +- drivers/usb/gadget/udc/bdc/bdc_core.c | 2 +- drivers/usb/gadget/udc/bdc/bdc_ep.c | 2 +- drivers/usb/gadget/udc/core.c | 4 ++-- drivers/usb/gadget/udc/fsl_qe_udc.h | 2 +- drivers/usb/gadget/udc/fsl_udc_core.c | 4 ++-- drivers/usb/gadget/udc/lpc32xx_udc.c | 2 +- drivers/usb/gadget/udc/pch_udc.c | 4 ++-- drivers/usb/gadget/udc/r8a66597-udc.c | 2 +- drivers/usb/gadget/udc/snps_udc_plat.c | 2 +- drivers/usb/gadget/udc/udc-xilinx.c | 4 ++-- drivers/usb/host/fhci-q.c | 2 +- drivers/usb/host/fhci-tds.c | 2 +- drivers/usb/host/oxu210hp-hcd.c | 2 +- drivers/usb/host/xhci.c | 8 ++++---- drivers/usb/image/mdc800.c | 2 +- drivers/usb/misc/sisusbvga/sisusbvga.c | 4 ++-- drivers/usb/musb/tusb6010.c | 2 +- drivers/usb/musb/ux500.c | 2 +- drivers/usb/phy/phy-fsl-usb.c | 2 +- drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- drivers/usb/renesas_usbhs/mod_host.c | 2 +- drivers/usb/storage/uas.c | 2 +- drivers/usb/typec/tcpm/fusb302.c | 2 +- drivers/usb/typec/tcpm/tcpm.c | 2 +- include/linux/usb/cdc.h | 2 +- 35 files changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 61723e7ab351..d569ee93b493 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -2189,7 +2189,7 @@ static void uea_stop(struct uea_softc *sc) release_firmware(sc->dsp_firm); } -/* syfs interface */ +/* sysfs interface */ static struct uea_softc *dev_to_uea(struct device *dev) { struct usb_interface *intf; diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c index 7a214a3a6cc7..f2225174f7df 100644 --- a/drivers/usb/c67x00/c67x00-ll-hpi.c +++ b/drivers/usb/c67x00/c67x00-ll-hpi.c @@ -113,7 +113,7 @@ static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value) } /* - * Only data is little endian, addr has cpu endianess + * Only data is little endian, addr has cpu endianness */ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, __le16 *data, u16 count) @@ -131,7 +131,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, } /* - * Only data is little endian, addr has cpu endianess + * Only data is little endian, addr has cpu endianness */ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, __le16 *data, u16 count) @@ -397,7 +397,7 @@ int c67x00_ll_reset(struct c67x00_device *dev) /* * c67x00_ll_write_mem_le16 - write into c67x00 memory - * Only data is little endian, addr has cpu endianess. + * Only data is little endian, addr has cpu endianness. */ void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr, void *data, int len) @@ -436,7 +436,7 @@ void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr, /* * c67x00_ll_read_mem_le16 - read from c67x00 memory - * Only data is little endian, addr has cpu endianess. + * Only data is little endian, addr has cpu endianness. */ void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr, void *data, int len) diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index ae6c94f41cb3..3697a45b3cf1 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -37,7 +37,7 @@ struct c67x00_ep_data { /* * struct c67x00_td * - * Hardware parts are little endiannes, SW in CPU endianess. + * Hardware parts are little endiannes, SW in CPU endianness. */ struct c67x00_td { /* HW specific part */ diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 7556c0dac908..1745d9f51a1c 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -1189,7 +1189,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) * * The subdriver will manage the given interrupt endpoint exclusively * and will issue control requests referring to the given intf. It - * will otherwise avoid interferring, and in particular not do + * will otherwise avoid interfering, and in particular not do * usb_set_intfdata/usb_get_intfdata on intf. * * The return value is a pointer to the subdriver's struct usb_driver. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3345b3298daf..54e0d4f61f00 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -6393,7 +6393,7 @@ int usb_reset_device(struct usb_device *udev) * is included in current configuration. The easist * approach is to do it for every device reset, * because the device 'memalloc_noio' flag may have - * not been set before reseting the usb device. + * not been set before resetting the usb device. */ noio_flag = memalloc_noio_save(); diff --git a/drivers/usb/fotg210/fotg210-hcd.h b/drivers/usb/fotg210/fotg210-hcd.h index 13c9342982ee..b7353a89a71a 100644 --- a/drivers/usb/fotg210/fotg210-hcd.h +++ b/drivers/usb/fotg210/fotg210-hcd.h @@ -283,7 +283,7 @@ struct fotg210_regs { #define PORT_RWC_BITS (PORT_CSC | PORT_PEC) u32 reserved2[19]; - /* OTGCSR: offet 0x70 */ + /* OTGCSR: offset 0x70 */ u32 otgcsr; #define OTGCSR_HOST_SPD_TYP (3 << 22) #define OTGCSR_A_BUS_DROP (1 << 5) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 51df6d1d1487..4e33239bb9e0 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -326,7 +326,7 @@ static ssize_t gadget_dev_desc_max_speed_store(struct config_item *item, mutex_lock(&gi->lock); - /* Prevent changing of max_speed after the driver is binded */ + /* Prevent changing of max_speed after the driver is bound */ if (gi->composite.gadget_driver.udc_name) goto err; diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 3c6b43d06a6d..a946f0030109 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -353,7 +353,7 @@ static ssize_t f_hidg_intout_read(struct file *file, char __user *buffer, list->pos += count; /* - * if this request is completely handled and transfered to + * if this request is completely handled and transferred to * userspace, remove its entry from the list and requeue it * again. Otherwise, we will revisit it again upon the next * call, taking into account its current read position. diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d8cf710085a0..f9ca07dec17e 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -206,7 +206,7 @@ static struct uac2_input_terminal_descriptor io_in_it_desc = { .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL), }; -/* Ouput Terminal for USB_IN */ +/* Output Terminal for USB_IN */ static struct uac2_output_terminal_descriptor usb_in_ot_desc = { .bLength = sizeof usb_in_ot_desc, .bDescriptorType = USB_DT_CS_INTERFACE, @@ -220,7 +220,7 @@ static struct uac2_output_terminal_descriptor usb_in_ot_desc = { .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL), }; -/* Ouput Terminal for I/O-Out */ +/* Output Terminal for I/O-Out */ static struct uac2_output_terminal_descriptor io_out_ot_desc = { .bLength = sizeof io_out_ot_desc, .bDescriptorType = USB_DT_CS_INTERFACE, diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index db961aaa3740..c8b71afb4e15 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1958,7 +1958,7 @@ static const struct file_operations ep0_operations = { /* FIXME PAM etc could set this security policy without mount options - * if epfiles inherited ownership and permissons from ep0 ... + * if epfiles inherited ownership and permissions from ep0 ... */ static unsigned default_uid; diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c index a8dbaef54aba..dfdb4c2948da 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_core.c +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -361,7 +361,7 @@ int bdc_reinit(struct bdc *bdc) return ret; } -/* Allocate all the dyanmic memory */ +/* Allocate all the dynamic memory */ static int bdc_mem_alloc(struct bdc *bdc) { u32 page_size; diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c index a7a22e5ec47b..608edd4ae5dd 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_ep.c +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -298,7 +298,7 @@ static int bd_available_ep(struct bdc_ep *ep) return bd_list->max_bdi - bd_list->num_tabs; /* - * Depending upon where eqp and dqp pointers are, caculate number + * Depending upon where eqp and dqp pointers are, calculate number * of avaialble bd's */ if (bd_list->hwd_bdi < bd_list->eqp_bdi) { diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index f6da12b553a0..fa2022e9bc60 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1101,7 +1101,7 @@ int usb_gadget_ep_match_desc(struct usb_gadget *gadget, EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc); /** - * usb_gadget_check_config - checks if the UDC can support the binded + * usb_gadget_check_config - checks if the UDC can support the bound * configuration * @gadget: controller to check the USB configuration * @@ -1524,7 +1524,7 @@ EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release); /** * usb_get_gadget_udc_name - get the name of the first UDC controller * This functions returns the name of the first UDC controller in the system. - * Please note that this interface is usefull only for legacy drivers which + * Please note that this interface is useful only for legacy drivers which * assume that there is only one UDC controller in the system and they need to * get its name before initialization. There is no guarantee that the UDC * of the returned name will be still available, when gadget driver registers diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h index 53ca0ff7c2cb..de3c9deb7409 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.h +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h @@ -329,7 +329,7 @@ struct qe_udc { u32 max_pipes; /* Device max pipes */ u32 max_use_endpts; /* Max endpointes to be used */ - u32 bus_reset; /* Device is bus reseting */ + u32 bus_reset; /* Device is bus resetting */ u32 resume_state; /* USB state to resume*/ u32 usb_state; /* USB current state */ u32 usb_next_state; /* USB next state */ diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index 20392409afb1..9c82713abbc4 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -1398,7 +1398,7 @@ __acquires(udc->lock) udc_reset_ep_queue(udc, 0); - /* We process some stardard setup requests here */ + /* We process some standard setup requests here */ switch (setup->bRequest) { case USB_REQ_GET_STATUS: /* Data+Status phase from udc */ @@ -1831,7 +1831,7 @@ static void reset_irq(struct fsl_udc *udc) if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { dev_vdbg(udc->dev, "Bus reset\n"); - /* Bus is reseting */ + /* Bus is resetting */ udc->bus_reset = 1; /* Reset all the queues, include XD, dTD, EP queue * head and TR Queue */ diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 044c31869cfb..7348704a9fc4 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -2743,7 +2743,7 @@ static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc) /* All types of errors, from cable removal during transfer to * misc protocol and bit errors. These are mostly for just info, * as the USB hardware will work around these. If these errors - * happen alot, something is wrong. */ + * happen a lot, something is wrong. */ udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT); tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT); dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp); diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index 99b3ce28210f..bf673e7faf37 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -319,7 +319,7 @@ struct pch_vbus_gpio_data { * @ep: array of endpoints * @lock: protects all state * @stall: stall requested - * @prot_stall: protcol stall requested + * @prot_stall: protocol stall requested * @suspended: driver in suspended state * @connected: gadget driver associated * @vbus_session: required vbus_session state @@ -846,7 +846,7 @@ static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev) } /** - * pch_udc_write_ep_interrupts() - Clear endpoint interupts + * pch_udc_write_ep_interrupts() - Clear endpoint interrupts * @dev: Reference to structure of type pch_udc_regs * @val: The value to be written to interrupt register */ diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index d190e16d43fc..105638d47c79 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -652,7 +652,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597, change_bfre_mode(r8a66597, ep->pipenum, 1); } - /* set r8a66597_ep paramters */ + /* set r8a66597_ep parameters */ ep->use_dma = 1; ep->dma = dma; ep->fifoaddr = D0FIFO; diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c index 0ee3ed185d9c..4b0c907b0f76 100644 --- a/drivers/usb/gadget/udc/snps_udc_plat.c +++ b/drivers/usb/gadget/udc/snps_udc_plat.c @@ -36,7 +36,7 @@ static void stop_udc(struct udc *udc) spin_lock(&udc->lock); - /* Flush the receieve fifo */ + /* Flush the receive fifo */ reg = readl(&udc->regs->ctl); reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH); writel(reg, &udc->regs->ctl); diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index bef06fe7543b..e6b9233ccdf9 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -128,7 +128,7 @@ struct xusb_req { * @name: name of the endpoint * @epnumber: endpoint number * @maxpacket: maximum packet size the endpoint can store - * @buffer0count: the size of the packet recieved in the first buffer + * @buffer0count: the size of the packet received in the first buffer * @buffer1count: the size of the packet received in the second buffer * @curbufnum: current buffer of endpoint that will be processed next * @buffer0ready: the busy state of first buffer @@ -311,7 +311,7 @@ static void xudc_epconfig(struct xusb_ep *ep, struct xusb_udc *udc) * Return: 0 on success, error code on failure * * This function starts DMA transfer by writing to DMA source, - * destination and lenth registers. + * destination and length registers. */ static int xudc_start_dma(struct xusb_ep *ep, dma_addr_t src, dma_addr_t dst, u32 length) diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c index 669c240523fe..b13ad02454e1 100644 --- a/drivers/usb/host/fhci-q.c +++ b/drivers/usb/host/fhci-q.c @@ -208,7 +208,7 @@ void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb) } /* - * caculate transfer length/stats and update the urb + * calculate transfer length/stats and update the urb * Precondition: irqsafe(only for urb-?status locking) */ void fhci_done_td(struct urb *urb, struct td *td) diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index d7482dc0604e..a52bddb45bb7 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -367,7 +367,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb) * Arguments: * usb A pointer to the USB structure * pkt A pointer to the user frame structure - * trans_type Transaction tyep - IN,OUT or SETUP + * trans_type Transaction type - IN,OUT or SETUP * dest_addr Device address - 0~127 * dest_ep Endpoint number of the device - 0~16 * trans_mode Pipe type - ISO,Interrupt,bulk or control diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index ca96067e6d6d..25c857efaa08 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -882,7 +882,7 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu, */ static int oxu_buf_alloc(struct oxu_hcd *oxu, struct ehci_qtd *qtd, int len) { - int n_blocks; /* minium blocks needed to hold len */ + int n_blocks; /* minimum blocks needed to hold len */ int a_blocks; /* blocks allocated */ int i, j; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index a9e47e178c28..4f1943fbd6ca 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -406,7 +406,7 @@ static void compliance_mode_recovery(struct timer_list *t) * The quirk creates a timer that polls every 2 seconds the link state of * each host controller's port and recovers it by issuing a Warm reset * if Compliance mode is detected, otherwise the port will become "dead" (no - * device connections or disconnections will be detected anymore). Becasue no + * device connections or disconnections will be detected anymore). Because no * status event is generated when entering compliance mode (per xhci spec), * this quirk is needed on systems that have the failing hardware installed. */ @@ -1178,7 +1178,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool power_lost, bool is_auto_resume) /* Delete all remaining commands */ xhci_cleanup_command_queue(xhci); - /* Clear data which is re-initilized during runtime */ + /* Clear data which is re-initialized during runtime */ xhci_for_each_ring_seg(xhci->interrupters[0]->event_ring->first_seg, seg) memset(seg->trbs, 0, sizeof(union xhci_trb) * TRBS_PER_SEGMENT); @@ -4296,7 +4296,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) pm_runtime_get_noresume(hcd->self.controller); /* Is this a LS or FS device under a HS hub? */ - /* Hub or peripherial? */ + /* Hub or peripheral? */ return 1; disable_slot: @@ -4512,7 +4512,7 @@ static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev) /* * Transfer the port index into real index in the HW port status - * registers. Caculate offset between the port's PORTSC register + * registers. Calculate offset between the port's PORTSC register * and port status base. Divide the number of per port register * to get the real index. The raw port number bases 1. */ diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index ca287b770e8c..5ff509a7e402 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -59,7 +59,7 @@ * has been removed. * * version 0.6.0 - * Rewrite of this driver: The Emulation of the rs232 protocoll + * Rewrite of this driver: The Emulation of the rs232 protocol * has been removed from the driver. A special executeCommand function * for this driver is included to gphoto. * The driver supports two kind of communication to bulk endpoints. diff --git a/drivers/usb/misc/sisusbvga/sisusbvga.c b/drivers/usb/misc/sisusbvga/sisusbvga.c index 3e75a7c24828..5a86962d86c0 100644 --- a/drivers/usb/misc/sisusbvga/sisusbvga.c +++ b/drivers/usb/misc/sisusbvga/sisusbvga.c @@ -590,7 +590,7 @@ static int sisusb_send_bridge_packet(struct sisusb_usb_data *sisusb, int len, * This means that * - the write routines expect "data" in machine endianness format. * The data will be converted to leXX in sisusb_xxx_packet. - * - the read routines can expect read data in machine-endianess. + * - the read routines can expect read data in machine-endianness. */ static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type, @@ -946,7 +946,7 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, return ret ? -EIO : 0; } -/* Remember: Read data in packet is in machine-endianess! So for +/* Remember: Read data in packet is in machine-endianness! So for * byte, word, 24bit, long no endian correction is necessary. */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 1d9571f24a56..6a86bebc24ca 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -941,7 +941,7 @@ static void tusb_musb_enable(struct musb *musb) musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff); musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff); - /* Clear all subsystem interrups */ + /* Clear all subsystem interrupts */ musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff); musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff); musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff); diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 8c2a43d992f5..6858beed1ac4 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -80,7 +80,7 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) /* * Devctl values will be updated after vbus goes below * session_valid. The time taken depends on the capacitance - * on VBUS line. The max discharge time can be upto 1 sec + * on VBUS line. The max discharge time can be up to 1 sec * as per the spec. Typically on our platform, it is 200ms */ if (!is_on) diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 1986f7e9d9be..96f206351c3f 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -166,7 +166,7 @@ static void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on) } /* - * Pull-up D+, signalling connect by periperal. Also used in + * Pull-up D+, signalling connect by peripheral. Also used in * data-line pulsing in SRP */ static void fsl_otg_loc_conn(struct otg_fsm *fsm, int on) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 0c7fe109d5c7..92f4f35f8bb1 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -852,7 +852,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) usbhs_pipe_config_update(dcp->pipe, 0, 0, 64); /* - * system config enble + * system config enable * - HI speed * - function * - usb module diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index f7ef3a9f82a4..c6a9d916135f 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1468,7 +1468,7 @@ static int usbhsh_start(struct usbhs_priv *priv) usbhsh_pipe_init_for_host(priv); /* - * system config enble + * system config enable * - HI speed * - host * - usb module diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 265162981269..0a3ffe15d26d 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -426,7 +426,7 @@ static void uas_data_cmplt(struct urb *urb) if (status) { if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) uas_log_cmd_state(cmnd, "data cmplt err", status); - /* error: no data transfered */ + /* error: no data transferred */ scsi_set_resid(cmnd, sdb->length); set_host_byte(cmnd, DID_ERROR); } else { diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 3319f6a2b0c9..d3258675fdbc 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -448,7 +448,7 @@ static int tcpm_get_current_limit(struct tcpc_dev *dev) /* * USB2 Charger detection may still be in progress when we get here, - * this can take upto 600ms, wait 800ms max. + * this can take up to 600ms, wait 800ms max. */ timeout = jiffies + msecs_to_jiffies(800); do { diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index a8cd1959c426..15a3cae27b6c 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -2504,7 +2504,7 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, /* * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host) * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or - * "wrong configuation" or "Unrecognized" + * "wrong configuration" or "Unrecognized" */ if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) && port->nr_snk_vdo) { diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 0af0db51bc89..861fdfa984dc 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -10,7 +10,7 @@ #include <uapi/linux/usb/cdc.h> /* - * inofficial magic numbers + * unofficial magic numbers */ #define CDC_PHONET_MAGIC_NUMBER 0xAB -- 2.48.1
