The following series implements and enables support for the FPGA based watchdog timers found on GE Fanuc's SBC610.
There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. --- Martyn Welch (2): powerpc: Enable watchdog timer on GE Fanuc's SBC610 watchdog: Basic support for GE Fanuc's FPGA based watchdog timer arch/powerpc/boot/dts/gef_sbc610.dts | 15 + arch/powerpc/configs/86xx/gef_sbc610_defconfig | 1 drivers/watchdog/Kconfig | 6 drivers/watchdog/Makefile | 1 drivers/watchdog/gef_wdt.c | 333 ++++++++++++++++++++++++ 5 files changed, 356 insertions(+), 0 deletions(-) create mode 100644 drivers/watchdog/gef_wdt.c -- Signature _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev