Support for the FPGA based watchdog timer on GE Fanuc's SBC610. This patch enables one of the watchdog timers found on the SBC610. There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <[EMAIL PROTECTED]> --- arch/powerpc/boot/dts/gef_sbc610.dts | 15 +++++++++++++++ arch/powerpc/configs/86xx/gef_sbc610_defconfig | 1 + 2 files changed, 16 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 1f7833c..2458690 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -88,6 +88,21 @@ compatible = "gef,fpga-regs"; reg = <0x4 0x0 0x40>; }; + + [EMAIL PROTECTED],2000 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + [EMAIL PROTECTED],2010 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ gef_pic: [EMAIL PROTECTED],4000 { #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 312d7af..99fe882 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1109,6 +1109,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_GEF_WDT=y # # PCI-based Watchdog Cards _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev