On Tue, 9 Dec 2008 07:10:27 +0100 Stefan Roese <[EMAIL PROTECTED]> wrote:
> On Tuesday 09 December 2008, Sean MacLennan wrote: > > On Thu, 4 Dec 2008 09:01:07 -0500 > > > > "Josh Boyer" <[EMAIL PROTECTED]> wrote: > > > In addition to an example DTS patch (probably to warp itself), could > > > you briefly write up a binding and put it in > > > Documentation/powerpc/dts-bindings/amcc (or similar)? Also please CC > > > the devicetree-discuss list on that part. > > > > Here is a start at the doc. I have sent it as a patch, but could just > > as easily send raw text. > > > > The example comes from the warp dts, just with less partitions, so I > > have not included a warp dts patch here. > > > > Cheers, > > Sean > > > > diff --git a/Documentation/powerpc/dts-bindings/amcc/ndfc.txt > > b/Documentation/powerpc/dts-bindings/amcc/ndfc.txt new file mode 100644 > > index 0000000..668f4a9 > > --- /dev/null > > +++ b/Documentation/powerpc/dts-bindings/amcc/ndfc.txt > > @@ -0,0 +1,31 @@ > > +AMCC NDFC (NanD Flash Controller) > > + > > +Required properties: > > +- compatible : "amcc,ndfc". > > The 4xx NAND controller was first implemented on the 440EP, IIRC. So I'm > pretty sure that this controller is an IBM core and not am AMCC core. So this > should be "ibm,ndfc". That is true. It's an IBM blue logic core. > And with this change it makes no sense to put this file "ndfc.txt" into the > amcc directory. > > Josh, where should this go then? I declare it to be: dts-bindings/4xx/ mostly because I don't want the bindings scattered across two directories simply because of the timeframe they showed up in the marketplace. If there are better ideas, I'm all ears. josh _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev