On Tue, Dec 23, 2008 at 09:45:09PM -0500, Alan Stern wrote:
> On Wed, 24 Dec 2008, Anton Vorontsov wrote:
>
> > This patch adds support for the FHCI USB controller, as found
> > in the Freescale MPC836x and MPC832x processors. It can support
> > Full or Low speed modes.
> >
> > Quite a lot the hardware is doing by itself (SOF generation, CRC
> > generation and checking), though scheduling and retransmission is on
> > software's shoulders.
> >
> > This controller does not integrate the root hub, so this driver also
> > fakes one-port hub. External hub is required to support more than
> > one device.
>
> It looks like the kernel this was written for is several versions out
> of date.
Yeah, originally it was written for 2.6.10. Though the driver I
posted is for the linux-next, and it works quite well w/o the
{un,}link_urb calls. ;-)
> The driver is missing some critical calls to functions like
> usb_hcd_link_urb_to_ep().
Fixed.
Thanks for review!
--
Anton Vorontsov
email: cbouatmai...@gmail.com
irc://irc.freenode.net/bd2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
