Hello, I cannot get my 2.6.28 kernel to boot. The board resets after u-boot starts the kernel.
I would like to verify if someone got it booting already? Regards, Leon. TFTP from server 192.168.1.24; our IP address is 192.168.1.15 Filename 'uImage-mpc8315e-rdb.bin'. Load address: 0x400000 Loading: T ################################################################# ################################################################# ######### done Bytes transferred = 2033899 (1f08eb hex) Speed: 1000, full duplex Using eTSEC0 device TFTP from server 192.168.1.24; our IP address is 192.168.1.15 Filename 'uImage-mpc8315e-rdb.dtb'. Load address: 0x700000 Loading: # done Bytes transferred = 12288 (3000 hex) ## Booting image at 00400000 ... Image Name: Angstrom/2.6.28/mpc8315e-rdb Created: 2009-01-03 22:44:25 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 2033835 Bytes = 1.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Booting using the fdt at 0x700000 U-Boot 1.3.0-rc2 (Oct 7 2008 - 11:57:25) MPC83XX -- Leon _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev