Hello, On Mon, Jan 5, 2009 at 11:07 PM, Leon Woestenberg <leon.woestenb...@gmail.com> wrote: >> >> 2.6.28 works fine here... using >> arch/powerpc/configs/83xx/mpc8315_rdb_defconfig and >> arch/powerpc/boot/dts/mpc8315erdb.dts >> Hope this helps, >> > Thanks for the report, I went back to the defconfig and at least it > gives me a partial boot: >
False report. The partial boot was with a 2.6.24.7 dts, and 2.6.28 uImage. After some experimenting, I noticed garbage on the serial port. The pre-programmed u-boot is too old. The stupid thing is, I ran into this earlier, the thread is here: http://www.mail-archive.com/u-boot-us...@lists.sourceforge.net/msg06551.html I forgot I was using the second board lying around, which hadn't had u-boot updated. Regards, -- Leon _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
