These are all powerpc specific drivers. res.start in fsl_elbc_nand.c needs to be cast since it may be either 32 or 64 bit. Thanks to Scott Wood for noticing.
Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Arnd Bergmann <[email protected]> call_edac bits in particular Acked-by: Olof Johansson <[email protected]> pasemi_nand peices Acked-by: Scott Wood <[email protected]> fsl_elbc fixes --- drivers/edac/cell_edac.c | 8 ++++---- drivers/mtd/nand/fsl_elbc_nand.c | 8 ++++---- drivers/mtd/nand/pasemi_nand.c | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-) The only change here is the cast noted above. I removed bluesmoke-devel because they reject my postings. diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index cd2e3b8..24f3ca8 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset, syndrome; - dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset; - dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); - dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); + dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg); chanmask = 0; if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP) chanmask |= 0x1; @@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) "Yuck ! No channel populated ? Aborting !\n"); return -ENODEV; } - dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n", + dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n", in_be64(®s->mic_fir)); /* Allocate & init EDAC MC data structure */ diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 65929db..1f6eb25 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); - dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n", + dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n", chip->chipsize); dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n", chip->pagemask); @@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", chip->ecc.layout); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); - dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size); + dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n", mtd->erasesize); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n", @@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, #endif add_mtd_device(&priv->mtd); - printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n", - res.start, priv->bank); + printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", + (unsigned long long)res.start, priv->bank); return 0; err: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 9bd6c9a..a8b9376 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end); + pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end); /* Allocate memory for MTD device structure and private data */ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) + @@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, goto out_lpc; } - printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n", + printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n", res.start, lpcctl); return 0; -- 1.6.0.5 -- Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/ _______________________________________________ Linuxppc-dev mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-dev
