I've pushed these commits to the test branch. This include the next branches from Kumar and Grant, which I'll move over to my "next" branch soon, probably tomorrow, if the world doesn't end in the meantime.
The rest is picked up from patchwork, and will trickle up to "next" as I see fit unless somebody hollers. People are _MUCH_WELCOME_ to pull that test branch and test it, that's the whole point of having it, so we can catch problems before their hit the next branch that we can't rebase. Further occurences of this announce won't be that verbose, though I haven't decided on a proper format or subject tag yet :-) Anton Vorontsov (2): powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E Benjamin Herrenschmidt (3): powerpc: Rework I$/D$ coherency (v2) Grant Likely (7): powerpc/5200: Stop using device_type and port-number properties powerpc/5200: Trim cruft from device trees powerpc/5200: Don't specify IRQF_SHARED in PSC UART driver powerpc/5200: Remove pr_debug() from hot paths in irq driver powerpc/5200: Refactor mpc5200 interrupt controller driver powerpc/5200: Rework GPT driver to also be an IRQ controller powerpc/5200: Add support for the Media5200 board from Freescale Grzegorz Bernacki (1): powerpc/5200: Add support for the digsy MTC board. Kumar Gala (3): powerpc/fsl-booke: Cleanup init/exception setup to be runtime powerpc/fsl: Ensure PCI_QUIRKS are enabled for FSL_PCI powerpc: Unify asm opcode definitions and support Laurent Pinchart (1): cpm2: Round the baud-rate clock divider to the nearest integer. Martyn Welch (3): powerpc/86xx: Board support for GE Fanuc SBC310 powerpc/86xx: Default configutation for GE Fanuc's SBC310 powerpc/86xx: Extend GE Fanuc GPIO driver for the SBC310 Michael Ellerman (7): powerpc: Remove unused ppc64_terminate_msg() powerpc: Allow debugging of LMBs with lmb=debug lmb: Rework lmb_dump_all() output powerpc/pseries: Fix MSI-X interrupt querying powerpc/pseries: Add support for ibm,req#msi-x powerpc/pseries: Check for MSI-X also in rtas_msi_pci_irq_fixup() powerpc/pseries: Return the number of MSIs we could allocate Milton Miller (3): powerpc/numa: Avoid possible reference beyond prop. length in find_min_common_depth() powerpc/numa: Remove redundant find_cpu_node() powerpc/pseries: Remove write only variable in PCI DLPAR Peter Korsgaard (1): powerpc: convert dts-bindings/fsl/dma.txt to dts-v1 syntax Reynes Philippe (2): powerpc/83xx: Add i2c eeprom to dts for MPC837x RDB powerpc/83xx: Add gpio to MPC837x RDB Trent Piepho (3): powerpc/fsl-booke: Remove code duplication in lowmem mapping powerpc/fsl-booke: Allow larger CAM sizes than 256 MB powerpc/fsl-booke: Make CAM entries used for lowmem configurable Wolfgang Grandegger (2): powerpc/85xx: TQM85xx - fix sensitivity of CAN interrupts powerpc/85xx: TQM85xx - add i2c device nodes for LM75 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev