Hi all, Has anybody tested KGDBOC in linux-2.6.28 for Xilinx Virtex-5 PowerPC target boards..
I just see that KGDB waits for remote connection from GDB host, but unfortunately Command line arguments were : console=ttyS0 ip=bootp root=/dev/nfs rw kgdboc=ttyS0 kgdbwait The test is been done on xilinx virtex-5 ppc440 target Target side: ---------------- Serial: 8250/16550 driver4 ports, IRQ sharing disabled 83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550A console [ttyS0] enabled kgdb: Registered I/O driver kgdboc. kgdb: Waiting for connection from remote gdb... ------------------ Host side ------------------ (gdb) target remote /dev/ttyS0 Remote debugging using /dev/ttyS0 Sending packet: $qSupported#37...Sending packet: $qSupported#37...Sending packet: $qSupported#37...Sending packet: $qSupported#37...Timed out. Timed out. Timed out ..... ..... ------------------ Is anything else need to be implemented for ppc44x for KGDB to work ? -- "The Good You Do, The Best You GET" Regards Srikanth Krishnakar **********************
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
