This patch removes #if 0'ed code, and spi_mpc83xx->busy variable that
is used by that dead snippet only.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
drivers/spi/spi_mpc83xx.c | 16 ----------------
1 files changed, 0 insertions(+), 16 deletions(-)
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 50112a5..4192ce4 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -98,8 +98,6 @@ struct mpc83xx_spi {
bool qe_mode;
- u8 busy;
-
struct workqueue_struct *workqueue;
struct work_struct work;
@@ -411,7 +409,6 @@ static void mpc83xx_spi_work(struct work_struct *work)
work);
spin_lock_irq(&mpc83xx_spi->lock);
- mpc83xx_spi->busy = 1;
while (!list_empty(&mpc83xx_spi->queue)) {
struct spi_message *m = container_of(mpc83xx_spi->queue.next,
struct spi_message, queue);
@@ -423,7 +420,6 @@ static void mpc83xx_spi_work(struct work_struct *work)
spin_lock_irq(&mpc83xx_spi->lock);
}
- mpc83xx_spi->busy = 0;
spin_unlock_irq(&mpc83xx_spi->lock);
}
@@ -482,18 +478,6 @@ static int mpc83xx_spi_setup(struct spi_device *spi)
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n",
__func__, spi->mode & (SPI_CPOL | SPI_CPHA),
spi->bits_per_word, spi->max_speed_hz);
-#if 0 /* Don't think this is needed */
- /* NOTE we _need_ to call chipselect() early, ideally with adapter
- * setup, unless the hardware defaults cooperate to avoid confusion
- * between normal (active low) and inverted chipselects.
- */
-
- /* deselect chip (low or high) */
- spin_lock(&mpc83xx_spi->lock);
- if (!mpc83xx_spi->busy)
- mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
- spin_unlock(&mpc83xx_spi->lock);
-#endif
return 0;
}
--
1.6.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
