Add a node for the i2c eeprom and delete the superflous gpio-example.
Signed-off-by: Wolfram Sang <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: [email protected]
---
arch/powerpc/boot/dts/pcm030.dts | 26 ++++----------------------
1 files changed, 4 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 8958347..33ce488 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -258,34 +258,16 @@
compatible = "nxp,pcf8563";
reg = <0x51>;
};
- /* FIXME: EEPROM */
+ eep...@52 {
+ compatible = "at24,24c32";
+ reg = <0x52>;
+ };
};
s...@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
-
- /* This is only an example device to show the usage of gpios.
It maps all available
- * gpios to the "gpio-provider" device.
- */
- gpio {
- compatible = "gpio-provider";
-
- /* mpc52xx exp.con
patchfield */
- gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d
jp13-3 */
- &gpio_wkup 1 0 /* GPIO_WKUP_6 14c
*/
- &gpio_wkup 6 0 /* PSC2_4 43c
x5-11 */
- &gpio_simple 2 0 /* IRDA_1 24c
x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */
- &gpio_simple 3 0 /* IRDA_0
x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */
- &gpt2 0 0 /* timer2 12d
x4-4 */
- &gpt3 0 0 /* timer3 13d
x6-4 */
- &gpt4 0 0 /* timer4 61c
x2-16 */
- &gpt5 0 0 /* timer5 44c
x7-11 */
- &gpt6 0 0 /* timer6 60c
x8-15 */
- &gpt7 0 0 /* timer7 36a
x17-9 */
- >;
- };
};
p...@f0000d00 {
--
1.6.2
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
