Hi, Is there somebody else whom i should also address to get an attention for this patch ? I apolozise if i have not included someone. Kindly connect to the concerned.
Regards-- Subrata On Wed, 2009-07-01 at 19:22 +0530, Subrata Modak wrote: > Hi, > > Linux next tree(20090626) produced the following build error: > > CC [M] drivers/mtd/maps/sbc8240.o > drivers/mtd/maps/sbc8240.c:31:1: warning: "DEBUG" redefined > In file included from drivers/mtd/maps/sbc8240.c:23: > include/linux/mtd/mtd.h:333:1: warning: this is the location of the previous > definition > drivers/mtd/maps/sbc8240.c: In function 'init_sbc8240_mtd': > drivers/mtd/maps/sbc8240.c:172: warning: passing argument 1 of > 'simple_map_init' from incompatible pointer type > drivers/mtd/maps/sbc8240.c:177: error: 'struct mtd_info' has no member named > 'module' > make[3]: *** [drivers/mtd/maps/sbc8240.o] Error 1 > make[2]: *** [drivers/mtd/maps] Error 2 > make[1]: *** [drivers/mtd] Error 2 > make: *** [drivers] Error 2 > > I remember reporting this back in April, when it was suggested to remove > the code as it is no more used: > http://lkml.org/lkml/2009/4/21/476, > > I tried to gather some more info about this driver from the link > mentioned in Kconfig: > http://www.windriver.com/products/sbc8240/, > without much success. > > The original author of this driver code has no problem, as she has > expressed by the following mail: > > >On Tue, 2009-06-30 at 09:37 -0700, carolyn.j.sm...@tektronix.com wrote: > >Hello Subrata, > > > > I am the original author of this file and have no objection to its removal > > from the 2.6 kernel. I added it to the 2.4 kernel when I ported Linux to > > the SBC8240 board many years ago. I haven't used the board in several years. > > > > Regards, > > Carolyn > > > > Last time i did not address: linux-...@lists.infradead.org. If there are > no issues, can you please apply this patch to remove it ? > > To: linux-...@lists.infradead.org, > Cc: David Woodhouse <dw...@infradead.org>, > Cc: Scott Wood <scottw...@freescale.com>, > Cc: Jim Cromie <jim.cro...@gmail.com>, > Cc: carolyn.j.sm...@exgate.tek.com, > Cc: dw...@infradead.org, > Cc: Sachin P Sant <sach...@linux.vnet.ibm.com>, > Cc: Balbir Singh <bal...@linux.vnet.ibm.com>, > Cc: Stephen Rothwell <s...@canb.auug.org.au>, > Cc: linux-kernel <linux-ker...@vger.kernel.org>, > Cc: Linuxppc-dev <linuxppc-...@ozlabs.org>, > Cc: linux-next <linux-n...@vger.kernel.org>, > -- > > Signed-off-by: Subrata Modak <subr...@linux.vnet.ibm.com> > Tested-on-PPC64-by: Subrata Modak <subr...@linux.vnet.ibm.com> > --- > > diff -uprN a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig > --- a/drivers/mtd/maps/Kconfig 2009-06-26 07:36:23.000000000 -0500 > +++ b/drivers/mtd/maps/Kconfig 2009-06-26 07:39:34.000000000 -0500 > @@ -284,13 +284,6 @@ config MTD_L440GX > > BE VERY CAREFUL. > > -config MTD_SBC8240 > - tristate "Flash device on SBC8240" > - depends on MTD_JEDECPROBE && 8260 > - help > - Flash access on the SBC8240 board from Wind River. See > - <http://www.windriver.com/products/sbc8240/> > - > config MTD_TQM8XXL > tristate "CFI Flash device mapped on TQM8XXL" > depends on MTD_CFI && TQM8xxL > diff -uprN a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile > --- a/drivers/mtd/maps/Makefile 2009-06-26 07:36:23.000000000 -0500 > +++ b/drivers/mtd/maps/Makefile 2009-06-26 07:40:03.000000000 -0500 > @@ -50,7 +50,6 @@ obj-$(CONFIG_MTD_UCLINUX) += uclinux.o > obj-$(CONFIG_MTD_NETtel) += nettel.o > obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o > obj-$(CONFIG_MTD_H720X) += h720x-flash.o > -obj-$(CONFIG_MTD_SBC8240) += sbc8240.o > obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o > obj-$(CONFIG_MTD_IXP2000) += ixp2000.o > obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o > diff -uprN a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c > --- a/drivers/mtd/maps/sbc8240.c 2009-06-26 07:36:23.000000000 -0500 > +++ b/drivers/mtd/maps/sbc8240.c 1969-12-31 18:00:00.000000000 -0600 > @@ -1,250 +0,0 @@ > -/* > - * Handle mapping of the flash memory access routines on the SBC8240 board. > - * > - * Carolyn Smith, Tektronix, Inc. > - * > - * This code is GPLed > - */ > - > -/* > - * The SBC8240 has 2 flash banks. > - * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors. > - * It contains the U-Boot code (7 sectors) and the environment (1 sector). > - * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB > sector, > - * 2 x 8 KiB sectors, 1 x 16 KiB sectors. > - * Both parts are JEDEC compatible. > - */ > - > -#include <linux/module.h> > -#include <linux/types.h> > -#include <linux/kernel.h> > -#include <asm/io.h> > - > -#include <linux/mtd/mtd.h> > -#include <linux/mtd/map.h> > -#include <linux/mtd/cfi.h> > - > -#ifdef CONFIG_MTD_PARTITIONS > -#include <linux/mtd/partitions.h> > -#endif > - > -#define DEBUG > - > -#ifdef DEBUG > -# define debugk(fmt,args...) printk(fmt ,##args) > -#else > -# define debugk(fmt,args...) > -#endif > - > - > -#define WINDOW_ADDR0 0xFFF00000 /* 512 KiB */ > -#define WINDOW_SIZE0 0x00080000 > -#define BUSWIDTH0 1 > - > -#define WINDOW_ADDR1 0xFF000000 /* 4 MiB */ > -#define WINDOW_SIZE1 0x00400000 > -#define BUSWIDTH1 8 > - > -#define MSG_PREFIX "sbc8240:" /* prefix for our printk()'s */ > -#define MTDID "sbc8240-%d" /* for mtdparts= partitioning */ > - > - > -static struct map_info sbc8240_map[2] = { > - { > - .name = "sbc8240 Flash Bank #0", > - .size = WINDOW_SIZE0, > - .bankwidth = BUSWIDTH0, > - }, > - { > - .name = "sbc8240 Flash Bank #1", > - .size = WINDOW_SIZE1, > - .bankwidth = BUSWIDTH1, > - } > -}; > - > -#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map) > - > -/* > - * The following defines the partition layout of SBC8240 boards. > - * > - * See include/linux/mtd/partitions.h for definition of the > - * mtd_partition structure. > - * > - * The *_max_flash_size is the maximum possible mapped flash size > - * which is not necessarily the actual flash size. It must correspond > - * to the value specified in the mapping definition defined by the > - * "struct map_desc *_io_desc" for the corresponding machine. > - */ > - > -#ifdef CONFIG_MTD_PARTITIONS > - > -static struct mtd_partition sbc8240_uboot_partitions [] = { > - /* Bank 0 */ > - { > - .name = "U-boot", /* U-Boot Firmware > */ > - .offset = 0, > - .size = 0x00070000, /* 7 x 64 KiB sectors > */ > - .mask_flags = MTD_WRITEABLE, /* force read-only > */ > - }, > - { > - .name = "environment", /* U-Boot environment > */ > - .offset = 0x00070000, > - .size = 0x00010000, /* 1 x 64 KiB sector > */ > - }, > -}; > - > -static struct mtd_partition sbc8240_fs_partitions [] = { > - { > - .name = "jffs", /* JFFS filesystem > */ > - .offset = 0, > - .size = 0x003C0000, /* 4 * 15 * 64KiB > */ > - }, > - { > - .name = "tmp32", > - .offset = 0x003C0000, > - .size = 0x00020000, /* 4 * 32KiB > */ > - }, > - { > - .name = "tmp8a", > - .offset = 0x003E0000, > - .size = 0x00008000, /* 4 * 8KiB > */ > - }, > - { > - .name = "tmp8b", > - .offset = 0x003E8000, > - .size = 0x00008000, /* 4 * 8KiB > */ > - }, > - { > - .name = "tmp16", > - .offset = 0x003F0000, > - .size = 0x00010000, /* 4 * 16KiB > */ > - } > -}; > - > -/* trivial struct to describe partition information */ > -struct mtd_part_def > -{ > - int nums; > - unsigned char *type; > - struct mtd_partition* mtd_part; > -}; > - > -static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS]; > -static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS]; > - > - > -#endif /* CONFIG_MTD_PARTITIONS */ > - > - > -static int __init init_sbc8240_mtd (void) > -{ > - static struct _cjs { > - u_long addr; > - u_long size; > - } pt[NUM_FLASH_BANKS] = { > - { > - .addr = WINDOW_ADDR0, > - .size = WINDOW_SIZE0 > - }, > - { > - .addr = WINDOW_ADDR1, > - .size = WINDOW_SIZE1 > - }, > - }; > - > - int devicesfound = 0; > - int i,j; > - > - for (i = 0; i < NUM_FLASH_BANKS; i++) { > - printk (KERN_NOTICE MSG_PREFIX > - "Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr); > - > - sbc8240_map[i].map_priv_1 = > - (unsigned long) ioremap (pt[i].addr, pt[i].size); > - if (!sbc8240_map[i].map_priv_1) { > - printk (MSG_PREFIX "failed to ioremap\n"); > - for (j = 0; j < i; j++) { > - iounmap((void *) sbc8240_map[j].map_priv_1); > - sbc8240_map[j].map_priv_1 = 0; > - } > - return -EIO; > - } > - simple_map_init(&sbc8240_mtd[i]); > - > - sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]); > - > - if (sbc8240_mtd[i]) { > - sbc8240_mtd[i]->module = THIS_MODULE; > - devicesfound++; > - } else { > - if (sbc8240_map[i].map_priv_1) { > - iounmap((void *) sbc8240_map[i].map_priv_1); > - sbc8240_map[i].map_priv_1 = 0; > - } > - } > - } > - > - if (!devicesfound) { > - printk(KERN_NOTICE MSG_PREFIX > - "No suppported flash chips found!\n"); > - return -ENXIO; > - } > - > -#ifdef CONFIG_MTD_PARTITIONS > - sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions; > - sbc8240_part_banks[0].type = "static image"; > - sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions); > - sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions; > - sbc8240_part_banks[1].type = "static file system"; > - sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions); > - > - for (i = 0; i < NUM_FLASH_BANKS; i++) { > - > - if (!sbc8240_mtd[i]) continue; > - if (sbc8240_part_banks[i].nums == 0) { > - printk (KERN_NOTICE MSG_PREFIX > - "No partition info available, registering whole > device\n"); > - add_mtd_device(sbc8240_mtd[i]); > - } else { > - printk (KERN_NOTICE MSG_PREFIX > - "Using %s partition definition\n", > sbc8240_part_banks[i].mtd_part->name); > - add_mtd_partitions (sbc8240_mtd[i], > - sbc8240_part_banks[i].mtd_part, > - sbc8240_part_banks[i].nums); > - } > - } > -#else > - printk(KERN_NOTICE MSG_PREFIX > - "Registering %d flash banks at once\n", devicesfound); > - > - for (i = 0; i < devicesfound; i++) { > - add_mtd_device(sbc8240_mtd[i]); > - } > -#endif /* CONFIG_MTD_PARTITIONS */ > - > - return devicesfound == 0 ? -ENXIO : 0; > -} > - > -static void __exit cleanup_sbc8240_mtd (void) > -{ > - int i; > - > - for (i = 0; i < NUM_FLASH_BANKS; i++) { > - if (sbc8240_mtd[i]) { > - del_mtd_device (sbc8240_mtd[i]); > - map_destroy (sbc8240_mtd[i]); > - } > - if (sbc8240_map[i].map_priv_1) { > - iounmap ((void *) sbc8240_map[i].map_priv_1); > - sbc8240_map[i].map_priv_1 = 0; > - } > - } > -} > - > -module_init (init_sbc8240_mtd); > -module_exit (cleanup_sbc8240_mtd); > - > -MODULE_LICENSE ("GPL"); > -MODULE_AUTHOR ("Carolyn Smith <carolyn.sm...@tektronix.com>"); > -MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards"); > - > > --- > Regards-- > Subrata > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
