Kumar Gala wrote:
On Aug 13, 2009, at 6:06 PM, Paul Gortmaker wrote:
From: Liang Li <liang...@windriver.com>
The existing fsl_rstcr_restart function fails to reset the sbc8560
board. This implements a board specific reset function that uses
the RCR(Reset Control Register) of the board's EPLD to do a reset.
Signed-off-by: Liang Li <liang...@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com>
---
arch/powerpc/platforms/85xx/sbc8560.c | 39
++++++++++++++++++++++++++++++++-
1 files changed, 38 insertions(+), 1 deletions(-)
The reason it didn't was that feature doesnt exist on the mpc8560 :)
I could see how that might have an impact on the
functionality.... :-)
So, what should the guts block of the 8560 dts look
like? It currently has the standard:
------------
global-utilit...@e0000 {
compatible = "fsl,mpc8560-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
------------
MPC8560 has a guts block, but saying "has-rstcr", as
you've pointed out, is a bit of a lie. If we remove that
tag, then we'll trip the:
printk(KERN_INFO "rstcr compatible register does not exist!\n");
which isn't the end of the world, but at the moment it
reads more like an error message, vs. an informative one.
Paul.
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
