On Tue, Aug 18, 2009 at 10:28:04AM +0800, Tiejun Chen wrote:
>To support cuImage, we need to initialize the required sections and
>ensure that it is built.
>
>- cuboot-acadia.c cuboot-amigaone.c
>+ cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
> src-boot := $(src-wlib) $(src-plat) empty.c
>
> src-boot := $(addprefix $(obj)/, $(src-boot))
>@@ -192,6 +192,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage
> image-$(CONFIG_EP405) += dtbImage.ep405
> image-$(CONFIG_WALNUT) += treeImage.walnut
> image-$(CONFIG_ACADIA) += cuImage.acadia
>+image-$(CONFIG_KILAUEA) += cuImage.kilauea
I'm not thrilled with this part as cuImage is really the secondary
solution if the U-Boot that comes with a board if FDT aware. If you
have a different board that needs this, perhaps you could add the
target when that board support gets upstream?
>+static void kilauea_fixups(void)
>+{
>+ /*TODO: Please change this as the real. Note that should be
>33MHZ~100MHZ.*/
What does that mean?
josh
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
