On Wed, 9 Sep 2009 15:28:01 -0500 Kumar Gala <ga...@kernel.crashing.org> wrote:
> > On Sep 9, 2009, at 1:22 PM, Scott Wood wrote: > > > On Fri, Sep 04, 2009 at 12:31:25PM +0200, Roland Lezuo wrote: > >> The following patch is needed to correctly assign the IRQs for the > >> gianfar driver on the MPC8313ERDB-revc boards. ERR and TX are swapped > >> as well as the interrupt lines for the two devices. > > > > And it will incorrectly assign them on older revisions of the chip. > > > > We really should have a u-boot fixup based on SVR. definitely. > I felt like Kim did this. I never got my hands on a Rev. C board. What's the SVR on it? I think this is also valid for Rev. B boards, and I don't have one of those either. Kim _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev