Hello Grant, Grant Likely wrote: > Comments below. > > On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <h...@denx.de> wrote: >> - serial Console on PSC1 >> - 64MB SDRAM >> - MTD CFI Flash >> - Ethernet FEC >> - I2C with PCF8563 and Temp. Sensor ADM9240 >> - IDE support >> >> Signed-off-by: Heiko Schocher <h...@denx.de> >> >> arch/powerpc/boot/dts/mucmc52.dts | 231 ++++ >> arch/powerpc/configs/52xx/mucmc52_defconfig | 1476 >> ++++++++++++++++++++++++++ > > Same comment as on your other patch. Drop the defconfig and add the > needed bits to mpc5200_defconfig (in a separate patch, and add drivers > as modules).
Yep, thanks. I look, how this works. >> diff --git a/arch/powerpc/boot/dts/mucmc52.dts >> b/arch/powerpc/boot/dts/mucmc52.dts >> new file mode 100644 >> index 0000000..a4a7a20 >> --- /dev/null >> +++ b/arch/powerpc/boot/dts/mucmc52.dts >> @@ -0,0 +1,231 @@ >> +/* >> + * mucmc52 board Device Tree Source >> + * >> + * Copyright (C) 2009 DENX Software Engineering GmbH >> + * Heiko Schocher <h...@denx.de> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License as published by the >> + * Free Software Foundation; either version 2 of the License, or (at your >> + * option) any later version. >> + */ >> + >> +/dts-v1/; >> + >> +/ { >> + model = "man,mucmc52"; >> + compatible = "man,mucmc52"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + interrupt-parent = <&mpc5200_pic>; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + PowerPC,5...@0 { >> + device_type = "cpu"; >> + reg = <0>; >> + d-cache-line-size = <32>; >> + i-cache-line-size = <32>; >> + d-cache-size = <0x4000>; // L1, 16K >> + i-cache-size = <0x4000>; // L1, 16K >> + timebase-frequency = <0>; // from bootloader >> + bus-frequency = <0>; // from bootloader >> + clock-frequency = <0>; // from bootloader >> + }; >> + }; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x00000000 0x04000000>; // 64MB >> + }; >> + >> + soc5...@f0000000 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "fsl,mpc5200-immr"; > > Does this board use the older and rarer non-'B' mpc5200 part? If not, > then fsl,mpc5200b-immr also needs to be in this list. OK, I add this too Thanks bye Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev