One of the guys here was getting a messed up console on a bamboo board (on linux boot), which he traced to the fact that the default dts has a 9600 baudrate coded into it (board was running 115k2, not 9600). Either deleting the line, or replacing the 9600 with zero fixed the problem.
Looking at the Fsl boards, it seems that 99% of them don't list any current-speed at all. I'm willing to whip up a patch to delete them from the various boards, but I thought I'd check 1st to see if there was some other reasoning/input. I suppose one could argue that u-boot should be replacing the 9600 with 115k2 on the fly, but if the explicit specification isn't helping anyone, then it probably just makes sense to delete them anyway, I figured. Here is the subset of boards I was considering deleting the lines from: bamboo.dts ebony.dts hcu4.dts holly.dts katmai.dts sam440ep.dts sequoia.dts taishan.dts walnut.dts yosemite.dts Thanks, Paul. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev